Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
HP X.25 Release Notes
Known Problems and Workarounds
Table 1-1
Recommended Window Sizes (Continued)
Level 3 Packet Size
Level 2 Window Size
128
1 - 127
64
1 - 127
32
1 - 127
16
1 - 127
•
nettl sequence numbering in traces may be incorrect with
modulo-128.
Workaround. You may disregard the sequence numbering
information, or use strace to see Level 3 packet sequence numbers.
•
If the customer has turned ON nettl logging/tracing for a port/card
and the user wants to re-initialize the port/card then, he will have to
turn OFF the nettl logging/tracing before re-initializing the
port/card.
•
If configuring the X.25 cards using SAM, SAM allows users to change
the config file names. However, users are required to retain the
default config file names generated by SAM. Changing the names of
the config file will affect the OLAR of these cards.
•
While testing the OLAR functionality with an installed card, it was
observed that:
— If a slot is powered off using “rad -o”, the slot powers ON
automatically if RS530 cable is connected.
— If the RS530 cable is already connected, ‘rad -o’ does not power
off the slot.
This problem is observed only if 3 or 4 ports are connected.
Workaround: Remove all the cables before adding/replacing any
cards on-line.
•
If you are modifying the PAD printer entry fields using SAM then,
SAM creates new entry fields for the entries instead of modifying the
existing printer values.
6
Chapter 1
...Other models in this manual:
Network Equipment - HP-UX 11i v1 I/O Cards (27.36 kb)