Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
•
Check the cluster configuration plan for information on where to install adapters, switches,
and cable guides, and where cables are to be routed.
•
Check your server's documentation to see if additional tools may be required for component
installation.
•
For specific instructions on adapter installation, see system-specific documentation on
"installing networking adapters" for each server that adapters will be installed into.
•
Confirm that you have the required cables to make connections in the fabric (adapter to
adapter, adapter to switch, or switch to switch).
•
Confirm that HP Fabric Clustering System software suite software media is available. It is
included on CD or available on the Web through:
http://www.software.hp.com
•
Confirm that HP-UX super-user privileges are available; they are necessary to complete the
installation.
•
Confirm that the /usr/bin, /usr/sbin, /sbin, and /opt/rdma/bin directories are in
your PATH by logging in as root and using the echo $PATH command.
•
Confirm that the HP-UX operating system is the correct version, HP-UX 11i v3. Use the
uname -a command to determine the HP-UX version of your system. For more information
about the required operating system versions, see IB4X-00 Driver for InfiniBand Release Notes.
Information Available on the Host Channel Adapter
If you are collecting information from the
adapter before installation for inventory purposes, there is a GUID number on the card. This
number can also be obtained through the HP-UX Fabric Clustering System utilities, but if recording
information for inventory, include the GUID number as well, as it is unique for each adapter.
The GUID will have a format such as: 00:16:35:FF:FF:BF:09:01 .
Install HP Fabric Clustering System Adapters
CAUTION:
Adapters contain electronic components that can easily be damaged by small
amounts of electricity. To avoid damage, follow these guidelines:
•
Store adapters in their anti-static plastic bags until installation.
•
Work in a static-free area, if possible.
•
Handle adapters by the edges only. Do not touch electronic components or electrical traces.
•
Use a grounding wrist strap.
•
Use a suitable ground—any exposed metal surface on the computer chassis.
Installing the AT083A Host Channel Adapter
The adapter comes pre-configured. You do not have to set any jumpers or connectors.
The firmware for the HCA is compiled into the driver and the driver will download the current
version onto the HCA if an older version is on the card.
1.
Access the system card bay
a.
If the system is running, shut it down by executing: shutdown -h.
b.
Respond "y" to the continue to shutdown prompt.
c.
Wait for the system to shut down completely, and then power off the system by pressing
the system off button. Ensure that the system is grounded.
d.
Open the system to gain access to the PCIe backplane.
e.
Insert the card into the highest performance PCIe slot available.
6
HP PCIe 2-port 4X QDR Fabric Adapter Installation
...