|
Other manuals for this model:
manual abstract
This document provides information about the September 2008 release of the 10GigEthr-01
bundle for HP-UX 11i v3.
1 10GigEthr-01 Overview
The 10GigEthr-01 bundle contains the icxgbe version B.11.31.0809 driver, which supports the
AD386A PCIe 10 Gigabit Ethernet Card.
2 New and Changed Features in This Release
2.1 New Features
The following features are new with this version of 10GigEthr-01:
•
Accelerated Virtual I/O (AVIO) SSN support
The icxgbe driver now supports AVIO. This feature significantly improves HP Integrity
Virtual Machines (HPVM) I/O performance. For more information about AVIO, see the
HPVM documents at:
http://docs.hp.com/en/vse.html
•
Install kernel support
The icxgbe driver now supports the HP-UX 11i v3 install kernel.
2.2 Changed Features
There are no changed features included in 10GigEthr-01 at the time of this publication.
3 Problems Fixed in This Version
There are no defects or fixes included in 10GigEthr-01 at the time of this publication.
4 Known Problems and Limitations
No known problems were identified for this version of 10GigEthr-01 at the time of this publication.
5 Compatibility and Installation Requirements
This section describes the compatibility information and installation requirements for this release.
•
For specific installation instructions, see the installation procedure or overview document
for your card.
•
For detailed information on supported server platforms, operating systems, and firmware
level requirements, see the Ethernet System-Driver Matrix for HP-UX 11i v1, 11i v2, and 11i
v3.
These documents are available at:
http://docs.hp.com/en/netcom.html
5.1 Operating System and Version Compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware Requirements
This version of 10GigEthr-01 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v3
(B.11.31) operating system.
1 10GigEthr-01 Overview
3
...Other models in this manual:
Network Equipment - HP-UX 11i v3 I/O Cards (196.16 kb)