It is used mainly for quickly removing a large amount of material. Do not use this sander for sanding steel or magnesium. CAUTION. Always ensure that the tool is switched off and unplugged from the power supply before installing or removing the drum. Removing the planer barrel Note: Refer back to earlier in the Instruction Manual for detailed information (page 8). 1. Place the planer barrel on its side. 2. Raise the drum guard so that the Hex Head screw located on the blade barrel is exposed. (a

Use blades of the same dimensions and weight, or the barrel will oscillate and vibrate causing poor planing action and possibly a machine breakdown. Tighten the clamping screws (8) carefully when attaching the blades to the planer. A loose clamping screw could be extremely dangerous. Regularly check to see they are tightened securely. NOTE. Your planing surface will end up rough and uneven unless the blades are set properly and securely. The blades must be mounted so that the cutting edge is abs

2. Using the dust extraction adaptor (18) permits a dust extraction system to be connected to the dust extraction port (6). 3. To fit the adaptor (18) insert it into the port (6) and twist it clockwise until it locks into position. Removing and installing planer blades CAUTION. Always ensure that the tool is switched off and unplugged from the power supply before installing or removing blades. Your planer is fitted with reversible blades. Blades can be reversed when blunt. After both sides of th