Login:
Votes - 3, Average rating: 4.7 ( )

User manual Kenwood, model VR-615

Manafacture: Kenwood
File size: 1.27 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


To set for Group-2 DVD players: Press the numeric “2” key while pressing the “POWER ” key (not the DVD Power key) on your remote control. • If your DVD player is not listed in the list above, perform the set up for either Group-1 or Group-2. When the set up is successful, then your DVD player falls into that particular group. How to operate the DVD player with the remote control 1. Pressing the DVD Power key for more than 2 seconds turns the DVD player on or off. 2. To carry out the functions of the DVD player, first press the DVD Power key, then press each key for each operation as explained in the DVD operation pages in the operating instructions. In this case, the DVD operation mode is retained for 15 seconds after pressing any of those DVD operation buttons. (To turn the receiver operation mode within 15 seconds, press the RECEIVER key.) DVD player operation keys You can perform these basic operations using the keys described below when connected to KENWOOD DVD player. RETURN TOP MENU (Title) DOWN-PAGE-UP (Page up or down) 1 (Search) . (Search) 1 DISC SKIPBASS BOOST AUTO AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 2 3 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 ENTER BAND P.CALL MULTI CONTROL 4 5 6 7 8 9 0 +10 SET UP OSD SOUND RETURN LISTEN MODE DVD DISC SEL. CINEMA EQ LOUDNESS TOP MENU TONE(For RC-R0622 only) PHONO (For RC-R0620/R0622 only) DVD/6CH DOWN-PAGE-UP RDS DISPLAY (For RC-R0622/R0623 only) PTY Numeric keys (Select tracks) 7 (Stop) 6 (3 Play) 8 (Pause) ENTER (Enter) MENU OSD (OSD menu) %(Cursor ») fi(Cursor «) #(Cursor \) @(Cursor |) DVD POWER POWER RECEIVER (Receiver mode) 31 EN Basic remote control operations for other components Basic remote control operations for other components You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, MD recorder or CD player equipped with system control operations. % Cassette deck operations’ keys CD player operations’ keys 1 DISC SKIPBASS BOOST AUTO AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 2 3 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 ENTER BAND P.CALL MULTI CONTROL 4 5 6 7 8 9 0 +10 SET UP OSD SOUND RETURN LISTEN MODE DVD DISC SEL. CINEMA EQ LOUDNESS DOWN-PAGE-UP TOP MENU TONE 6 (3 Play) 7 (Stop) 1 (Rewind) . (Fast forward) A/B (Cassette deck selection) 2 (Reverse play) (For RC-R0620/R0622 only) DVD/6CH (For RC-R0622 only) PHONO RDS DISPLAY (For RC-R0622/R0623 only) PTY 1 DISC SKIPBASS BOOST AUTO AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 2 3 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 ENTER BAND P.CALL MULTI CONTROL 4 5 6 7 8 9 0 +10 SET UP OSD SOUND RETURN LISTEN MODE DVD DISC SEL. CINEMA EQ LOUDNESS TOP MENU TONE DOWN-PAGE-UP Numeric keys (Select tracks) 6 (Play/Pause) . (Skip up) DISC SKIP 1 (Search) . (Search) 4 (Skip down) 7 (Stop) (For RC-R0620/R0622 only) DVD/6CH (For RC-R0622 only) PHONO RDS DISPLAY (For RC-R0622/R0623 only) PTY MD recorder operations’ keys 1 DISC SKIPBASS BOOST AUTO AUX CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 2 3 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 ENTER BAND P.CALL MULTI CONTROL 4 5 6 7 8 9 0 +10 SET UP OSD SOUND RETURN LISTEN MODE DVD DISC SEL. CINEMA EQ LOUDNESS TOP MENU TONE +100 (Select tracks) Numeric keys (Select tracks) 6 (3 Play) . (Skip up) 1 (Search) . (Search) 4 (Skip down) 7 (Stop) DOWN-PAGE-UP (For RC-R0620/R0622 only) DVD/6CH (For RC-R0622 only) PHONO RDS DISPLAY (For RC-R0622/R0623 only) PTY Notes 1. Certain codes may only operate some of the function available on a given model. 2. The charts above show the typical functions available for each component. Some manufacturers use different key combinations to perform similar functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment. 32 EN In case of difficulty Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. • Please note that resetting the microcomputer will clear the contents of the memory and return the unit to the state it was in when it left the factory Unplug the power cord from the wall outlet, then plug it back in while holding down the POWER key. For the U.S.A. and Canada With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press POWER. For other countries Amplifier Symptom Cause Remedy No sound from the speakers. • The speaker cords are disconnected. • VOLUME is set to the minimum position. • MUTE is ON. • The SPEAKERS switches are set to OFF. • Connect them properly referring to “Connecting the speakers” # • Adjust the volume to a proper level. • Turn OFF the MUTE. ) • Set the SPEAKERS switch to ON. ( The...

Other models in this manual:
Receivers & Amplifiers - KRF-V4060D (1.27 mb)
Receivers & Amplifiers - KRF-V5060D (1.27 mb)
Receivers & Amplifiers - KRF-V5560D (1.27 mb)
Receivers & Amplifiers - VR-605 (1.27 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category