Votes - 4, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
Multi Channel AV Receiver (1) Optimizer microphone (ECM-AC2) (1) R6 (size-AA) batteries (2) What’s in the box You will need to have a speaker system in place and/or other equipment ready to connect. Multi Channel AV Receiver (1) Optimizer microphone (ECM-AC2) (1) R6 (size-AA) batteries (2) Remote (RM-AAP079) (1) AM loop antenna (aerial) (1) FM wire antenna (aerial) (1) 03 First, position your existing speakers around the room using the illustration below as a reference. eeYou can connect two FRONT HIGH speakers instead of two SURROUND BACK speakers if you prefer. eeUp to two subwoofers can be connected. 1 04 FRONTLSUBWOOFERSUBWOOFERCENTERFRONTRSTR-DN1030SURROUNDLSURROUNDRSURROUNDBACKLSURROUNDBACKR First, position your existing speakers around the room using the illustration below as a reference. eeYou can connect two FRONT HIGH speakers instead of two SURROUND BACK speakers if you prefer. eeUp to two subwoofers can be connected. 1 04 FRONTLSUBWOOFERSUBWOOFERCENTERFRONTRSTR-DN1030SURROUNDLSURROUNDRSURROUNDBACKLSURROUNDBACKR 05 Next, connect your speakers to the AV receiver. Match the labels for each terminal to the position of each speaker. Do not forget to connect the subwoofer cable(s) as well. Subwoofer . . 10 mm 06 Continue by connecting your TV. To enjoy high-quality video and audio, the optimal method is to connect via a High Speed HDMI cable (not supplied). To connect your Blu-ray Disc player, PlayStation®3, or satellite tuner, simply connect with a High Speed HDMI cable. Blu-ray Disc player, PlayStation®3, or satellite tuner Digital (better quality) Analog (good quality) 2 07 If your TV has an HDMI ARC jack, you do not need an optical digital cord. If your TV has no HDMI ARC jack, you need an optical digital cord (not supplied) to enjoy TV sound through the system speakers. HDMI cable Optical digital cord 08 For FM radio, connect the supplied FM wire antenna (aerial) into the FM ANTENNA jack and extend it for optimal reception. Alternatively, connect your own external antenna (aerial). You can connect to the Internet and home network via a wireless LAN or LAN cable (not supplied). For further details, visit: You can also connect your iPod/ iPhone to the iPod/iPhone terminals. Apple Composite AV Cable (not supplied) . . . . . . AM loop antenna (aerial) FM wire antenna (aerial) LAN cable (not supplied) 3 Now you can switch on the AV receiver, TV, subwoofer and other devices. Now you can switch on the AV receiver, TV, subwoofer and other devices. ./. The shape of the AC power cord (mains lead) and the AC outlet (mains), varies depending on the area. ./. 09 With the supplied remote, select the speaker pattern according to your speaker system. 1 Press MENU. The menu is displayed on the TV screen. 4 With the supplied remote, select the speaker pattern according to your speaker system. 1 Press MENU. The menu is displayed on the TV screen. 4 . 3 Press ./.repeatedly to select “Speaker”, then press . 4 Press ./.repeatedly to select “SP Pattern”, then press . 5 Press ./.repeatedly to select the speaker pattern you want, then press . 6 Press RETURN/EXIT .. ./., MENU RETURN/EXIT . 10 11 Confirm active subwoofer setup. When a subwoofer is connected, turn it on and turn up the volume prior to activating it. Turn the subwoofer’s LEVEL dial up about 1/3 of the way. Next, plug the supplied optimizer microphone into the AUTO CAL MIC jack. Place it roughly where you would normally sit, and at ear level – on the back of a sofa, for instance. Now perform Auto Calibration. 1 Press MENU. 2 Press ./.repeatedly to select “Settings”, then press or .. 4 Now perform Auto Calibration. 1 Press MENU. 2 Press ./.repeatedly to select “Settings”, then press or .. 4 or .. 4 Press ./.repeatedly to select “Start”, then press . 5 Press to select “START”. The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches. Note If a code appears on the screen, see the opposite page to fix the problem. 6 Press ./.repeatedly to select “Save”, then press . 7 Disconnect the optimizer microphone from the AV receiver. ./././., MENU 12 If an error code or warning appears on the TV screen after Auto Calibration, look it up below. After taking the appropriate steps, perform Auto Calibration again. If an error code or warning appears on the TV screen after Auto Calibration, look it up below. After taking the appropriate steps, perform Auto Calibration again. No speakers are selected. Press SPEAKERS to set the speakers. Error Code 32 Error Code 33 eeNone of the front speakers are connected, or only one front speaker is connected. eeThe optimizer microphone is not connected. eeThe surround left or surround right speaker is not connected. eeSurround back speakers or front high speakers are connected even though surround speakers are not connected. Connect surround speaker(s) to the SPEAKERS SURROUND terminals...