•Remember that reception of the calibration signal depends on the time kept in the digital display. The receive operation will be performed whenever the display shows any one of the calibration times, regardless of whether or not the displayed time is actually the correct time. •When two, three, four, or five receptions are successful, the watch uses the data of the last reception for calibration. When only one reception is successful, the watch uses the data of the successful reception. Receivi

INC. WakeMEup Alarm Clock STRONG BED SHAKER INCLUDED The WakeMEup Alarm Clock comes with a strong bed shaker, jumbo size LED display, adjustable loud audible buzzer, and lamp outlet. You can choose to turn on or off the bed shaker or lamp to match your life-style or adjust the buzzer volume to your comfort level. The adjustable display dimmer will give you the option to lower the brightness of the LED display. WakeMEup will be sure to wake up every morning. FEATURES • Adjustable loud audibl

Be sure to remove the sticker before using the clock. •Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes) Date (month – day) PM indicator Alarm time Alarm on indicator Alarm Off Snooze Alarm OnAlarm On Snooze on indicator Alarm on indicator GENERAL GUIDE 11111SNOOZE/LIGHT button •Press this button to illuminate the display for about three seconds. •Pressing this button while the alarm is sounding stops the alarm.

•Replace the battery at least once a year, even if the current battery is working properly. •The battery that comes with the clock loses some power during transport and storage. Operation Guide DQ-542/542B 2 Hour Minutes Press to toggle between 12-hour and 24-hour timekeeping. Press to advance the alarm time minute setting. Press to advance the alarm time hour setting. USING THEALARM The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of th

MAX/MIN HUMIDITY MAX/MIN SET DOWN(—) WAVE °C/ °F UP(+) RE-SYNC SELECT RESET CLEAR ™. 1579406832ABMain unit RESET SELECT TEST °C/ °F RESET SELECT TEST °C/ °F RESET SELECT TEST °C/ °F RESET SELECT TEST °C/ °F FCDE ™ . Sub-unit Operation Guide DQR-300U 2 •A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. Al

1. Press the SET button (6) to cycle through the setting screens as shown below. Current Time Screen Time Setting Screen 12-hour/24hour Setting Screen Contrast Adjustment Screen GMT Differential Setting Screen Temperature Unit Selection Screen Year Setting Screen Month and Day Setting Screen 2. While the screen you want is on the display, use the Alarm Time Set buttons (3) to change the digits that are flashing. Press to decrease the flashing digits. Press to increase the flashing digits. Pres

Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. Alarm Off Alarm On • In locations subject to radio frequency interference, the product may malfunction and require you to reset the product. MA0402-EB UP (+) SET SNZ ON OFF ALM RESET °C/ °F RE-SYNC WAVE TEMP. MAX/MIN CLEAR DOWN (—) UP (+) SET RESET °C/ °F RE-SYNC WAVE TEMP. MAX/MIN CLEAR DOWN (—) SNZ ON OFF ALM 1 4 3 78 2 5

•The clock beeps and display illumination flashes for about three seconds when a receive operation trigged by the WAVE button (4) is successful. Important! •Do not perform any button or switch operation while a signal receive operation is in progress. •The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data. •The DST indicator appears on the display when Daylight Saving Time (summer time) data is received. Setting the Time and Date Manually •When using

•The light also turns on for the first four seconds that the alarm sounds. •The alarm sound changes over four levels as it sounds. Stopping the Alarm •When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Mode selector (5) to OFF. USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading

Be sure to remove the sticker before using the clock. •Depending on its model number, the configuration of your clock may differ somewhat from that shown in the illustration. Alarm Off Snooze Alarm On PM indicator Receive indicator (Displayed during signal reception.) Date (month - day) Day of the week Antenna icon Wave OK indicator Current time (Hour, minutes, seconds) Snooze on indicator Alarm on indicator Alarm time GENERAL GUIDE 1SNOOZE/LIGHT button •Press this button to illuminate the displ