Login:
Votes - 4, Average rating: 4.5 ( )

User manual AT&T, model DECT 6

Manafacture: AT&T
File size: 154.98 kb
File name: 0b0e0c9e-3c52-41eb-843a-e6ead9787112.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


7. When the desired tone is selected, press MENU. Note that the page tone will not change until the handset is returned to the base. Key Tone This selects the sound that is made when a key is pressed. The choices are: OFF - No Tone, TONE - Each key makes the same tone, and MUSIC - Each key makes a different tone. 1. Press MENU. 2. Press CID/UP until PROFILE is displayed. 3. Press MENU. HS RINGER MUSICwill be displayed. 4. Press CID/DOWN until KEY TONE is displayed. 5. Press MENU. The current key tone setting will be displayed. 6. Press CID/UP or CID/DOWN to select between OFF, TONE, and MUSIC. 7. When the desired tone is selected, press MENU. 19 Alarm 1/Alarm 2 The 6012 will allow you to set up to two alarm times. At this time, the ringer of the telephone will ring. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press CID/UP until ALARM 1 or ALARM 2 is displayed. 5. Press MENU. The current setting of the alarm will be displayed. 6. Press CID/UP to toggle between ON and OFF. 7. If the alarm is turned on, SET TIME will display and the alarm time will show in the lower right of the display. 8. To set the alarm time, press MENU. 9. Use CID/UP or CID/DOWN to select the hour. Note that you must select the AM or PM value at this time. 10. When the hour is selected, press MENU. 11. Used CID/UP or CID/DOWN to select the minutes. 12. Press MENU. If you have activated an alarm, notice the alarm clock symbol in the display. 20 Function Menu This menu allows you to access the special features of the phone. Nondisturb This feature disables the ringer of the handset. You can choose to have the ringer disabled from 1 to 16 hours or select OFF to have the phone ring normally. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press MENU. HOUR and the current NONDISTURB setting will be displayed. 5. Press CID/UP or CID/DOWN to select OFF or the number of hours for NONDISTURB. 6. Press MENU. If you selected a value other than OFF, notice the NONDISTURB symbol in the display. Room Monitor This feature enables you to listen to a room using the transmitter of the handset. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press CID/UP. ROOM MONITOR will be displayed. 5. Press MENU twice. ROOM MONITOR will begin to bllink on the display. The unit is now in ROOM MONITOR mode. 6. To use the handset as a room monitor, initiate an intercom call to it from another handset. 21 Baby Call This feature will allow you to program an emergency number. This number will be dialed whenever the phone is taken off hook. Warning: If this feature is activated, the phone cannot be used to dial 911. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press CID/UP until BABY CALL is displayed. 5. Press MENU. INPUT NUMBER will be displayed. 6. Press MENU. If a number is stored, it will be displayed. Use ESC/ FLASH to delete numbers. Use the keypad to enter numbers. 7. When you are finished entering numbers, press MENU. 8. Press CID/UP. Select ON/OFF is displayed. 9. Press MENU. The current setting (ON or OFF) will be displayed. 10. Press CID/UP or CID/DOWN to toggle between ON and OFF. 11. When the desired setting is selected, press MENU. 12. If you have activated this feature, BABY CALL will flash on the display. Walkie Talkie 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4. Press CID/UP until Walkie Talkie is displayed. 5. Press MENU twice to enter Walkie Talkie mode. The handset will now connect to all other handsets registered to the same base. 6. Press MENU twice to exit Walkie Talkie mode. 22 Phone Book The 6012 can store the numbers of up to 100 of your contacts in the phone book. Names are sorted alphabetically starting with the first character. (If you want your Phone Book sorted by the last name, enter the last name first.) Entering a New Number 1. Press PHONEBOOK. The first entry in the phone book is displayed. 2. Press MENU. NEW ENTRY is displayed. 3. Press MENU. INPUT NAME is displayed. 4. Use the keypad to enter the name. Use the 0 key to enter a space. Use the ESC/FLASH key to delete a character. You may enter up to 16 characters. 5. Press MENU. INPUT NUMBER is displayed. 6. Use the keypad to enter the number. Use the ESC/FLASH key to delete a character. You may enter up to 24 digits. 7. Press MENU. 8. Press the HANG UP key to exit the Phone Book. Dialing from the Phone Book 1. Press PHONEBOOK. 2. Use CID/UP or CID/DOWN to scroll to the desired entry. 3. Press ANSWER and the number will be dialed. Memory Status This will tell you how many entries are in your phone book. 1. Press PHONEBOOK. The first entry in the phone book is displayed. 2. Press MENU. NEW ENTRY is displayed. 3. Press CID/UP. MEMORY STATUS is displayed. 4. Press MENU. The number of phone...

Other models in this manual:
Cordless Phones - DECT 6 (154.98 kb)
Cordless Phones - DECT 6 (154.98 kb)
Cordless Phones - DECT 6 (154.98 kb)
Cordless Phones - DECT 6 (154.98 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category