Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Press the SKIP/Search/HOUR ( ) button repeatedly to advance the player to higher numbered tracks. During playback, press the SKIP/Search/MINUTE ( ) button once to move the player back to the beginning of the currently playing track. Press the SKIP/Search/MINUTE ( ) button repeatedly to move the player back to lower numbered tracks. During playback, depress and hold either the SKIP/Search/HOUR ( ) . or SKIP/Search/MINUTE ( ) . button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed. When you release the SKIP/Search/HOUR ( ) . or SKIP/Search/MINUTE ( ) . button, normal playback will resume at that point. 12 3 10 CKD9905 O/M.QXD 5/29/03 1:38 PM Page 11 OPERATION (CONTINUED) REPEAT PLAYBACK To repeat a single track, press the REPEAT button . once. The Repeat indicator will blink. Press the SKIP/Search/HOUR ( ) . or MINUTE ( ) button . to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ) button . to begin playback. The specific track you selected will be repeated continuously. 2 1 3 4 1 To repeat all of the tracks on a disc continuously, press the REPEAT button . twice. The Repeat indicator will light. Press the PLAY/PAUSE ( ) button . to begin playback. All tracks on the disc will be repeated continuously. 12 2 13 2 3 To cancel Repeat Playback, press the REPEAT button . until the Repeat indicator is not lit. You can also cancel Repeat Playback by pressing the CD STOP (¦) button . or by pressing the POWER/ALARM RESET button . to turn the unit off. 11 CKD9905 O/M.QXD 5/29/03 1:38 PM Page 12 OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 20 TRACKS) Programming is the ability to preselect the order in which a series of tracks will be played. 1 1 23 2 Press the PROG button ., “P 01” will appear in the display and the PROG indicator will blink. Within eight seconds, press the SKIP/Search/HOUR . or MINUTE button . to select the desired track to program. Turn the unit on and slide the FUNCTION switch to the CD position. 3 21 3 12 4 To skip forward or backward through the programs, press the SKIP/ Search/HOUR ( ) . or SKIP/ Search/MINUTE ( ) . button. When the disc is through playing, it will stop. Press the PROG button . to memorize the track. Repeat steps 2 and 3 to program additional tracks up to a maximum of 20 tracks. Press the PLAY/PAUSE ( ) button . to begin program playback and adjust the VOLUME control . as desired. NOTES: • Press the REPEAT button twice during program playback to repeat the program repeatedly until the STOP (¦) button is pressed. • Press the STOP (¦) button to stop the disc before it is finished. • To cancel program playback, while in stop mode, press the PROG button until the PROG indicator blinks, then press the STOP (¦) button. • Each track may be stored in the program memory as many times as desired (up to 20 tracks). 12 CKD9905 O/M.QXD 5/29/03 1:38 PM Page 13 OPERATION (CONTINUED) TO SET OR RESET THE ACTUAL TIME Press and hold the CLOCK button and the time will blink in the Display. 1 While holding the CLOCK button ., press the SKIP/Search/MINUTE button . to advance the minute and the SKIP/Search/HOUR button . to advance the hour until the desired time is shown on the display. 1 32 2 AM (TIME) LED INDICATOR In the upper left corner of the Display is the AM LED indicator. When the AM LED indicator is lit, the actual or alarm time shown in the Display is AM hours. When the indicator is not lit, the time shown is PM hours. TO SET OR RESET THE ALARM TIME(S) 1 1 31 2 2 Press and hold the desired ALM SET button (ALM.1 or ALM.2) and the selected alarm time will blink in the Display. While holding the desired ALM SET button button . , press the SKIP/Search/ MINUTE button . to advance the minute and the SKIP/Search/HOUR button . to advance the hour until the desired alarm time is shown on the display. 13 CKD9905 O/M.QXD 5/29/03 1:38 PM Page 14 OPERATION (CONTINUED) TO SET THE ALARM TO WAKE TO RADIO 21 1 2 Set the alarm time as previously instructed. Turn the unit on and slide the FUNCTION switch . to the FM ST. or AM position. Select a radio station and make sure the VOLUME . is set as desired. Slide the desired ALARM switch (ALARM1 or ALARM2), located at the left side of the unit to the ON position. Turn the unit off and slide the WAKE switch to the MUSIC position. When the actual time matches the selected preset alarm time(s), the unit automatically turns on. To shut off the alarm, see TO SHUT THE ALARM OFF section on the following page. TO SET THE ALARM TO WAKE TO CD 21 1 2 Set the alarm time as previously instructed. Insert a CD into the CD player, turn the unit on and slide the FUNCTION switch . to the CD position. Make sure the VOLUME . is set as desired. Slide the desired ALARM switch (ALARM1 or ALARM2), located at the left side of the unit to the ON position. Turn the unit o...