Votes - 4, Average rating: 4.5 ( )

Manafacture: Casio File size: 7.11 mb File name: Language of manual:

In the case of 4-screen projection, the name is displayed in the area where the computer screen image is being projected. The user name remains displayed for about five seconds after the key is pressed. Other Operations Re-establishing a Wireless LAN Connection After terminating a wireless LAN connection between the projector and a computer, you can re-establish the connection with the same projector or you can connect with another projector. On a Wireless Connection 3 window, click the function menu button and then click [Server Search] on the menu that appears. The computer will terminate the current wireless LAN connection and start searching for a projector it can connect to. Projector Information On a Wireless Connection 3 window, click the function menu button and then click [Info] on the menu that appears. This will display a dialog box with information about the currently connected projector. Selecting display speed priority or resolution priority for projection When projecting over a wireless LAN connection, you can configure the projector to give priority either to display speed or to resolution. To select display speed priority or resolution priority for projection 1. On a Wireless Connection 3 window, click the function menu button and then click [Projection Setting] on the menu that appears. 2. On the sub-menu that appears, click “High-speed” or “High-resolution”. High-speed : This setting gives more priority to display speed (frame rate) than to resolution. Image resolution (gradations) with this setting is 16-bit color. High-resolution: This setting gives more priority to resolution than display speed. Image resolution (gradations) with this setting is 32-bit color. 28 Terminating a Wireless LAN Connection Use Wireless Connection 3 to terminate a wireless LAN connection between the projector and a computer. Click the close button in the upper right corner of the Wireless Connection 3 window. Initializing Wireless Connection 3 Performing the following procedure returns the passphrase/WEP key that is currently recorded on the computer running Wireless Connection 3 to its initial default. To initialize Wireless Connection 3 1. On a Wireless Connection 3 window, click the function menu button and then click [Initialize] on the menu that appears. • This will cause the confirmation dialog box shown below to appear. 2. Click [OK] to initialize or [Cancel] to cancel initialization. 29 Configuring Wireless Settings Configuring Wireless Settings You can use the projector’s setup menu to configure the Wireless function settings described below. Setting Name Description Change SSID Switches the projector’s SSID setting from one of the three default SSIDs to another. Initialize Wireless Setup Returns all Wireless settings to their initial factory defaults. Note More advanced projector wireless LAN connection settings (connection setup, security settings, etc.) can be configured using the System Admin page, which can be accessed from the computer currently connected to the projector via wireless LAN. For more information, see “System Admin Page Operations and Settings” (page 32). To switch between Default SSIDs Important! • This procedure can be used only to change from one default SSID to another default SSID. If the current SSID or the SSID being changed to is not one of the three default SSIDs, access the projector’s System Admin page from a computer to change. • For information about accessing System Admin page, see “System Admin Page Operations and Settings” (page 32). 1. While the Wireless screen is being projected, press the [MENU] key. 2. Use the [.] key to move the highlighting to “Wireless” and then press the [ENTER] key. 3. Use the [.] key to move the highlighting to “Change SSID” and then press the [ENTER] key. • This displays a dialog box like the one shown below for changing the SSID. 4. Use the [.] and [.] keys to move the highlighting to the SSID you want to select and then press the [ENTER] key. 5. To close the dialog box, press the [ESC] key. 30 To initialize the Wireless setup 1. While the Wireless screen is being projected, press the [MENU] key. 2. Use the [.] key to move the highlighting to “Wireless” and then press the [ENTER] key. 3. Use the [.] key to move the highlighting to “Initialize Wireless Setup” and then press the [ENTER] key. • This will cause a “Initialize the Wireless setup?” confirmation dialog box to appear. 4. Press the [.] key to move the highlighting to “Yes” and then press the [ENTER] key. • This will perform initialization, which will return all Wireless settings, including settings configured with the projector’s System Admin page, to their initial factory defaults. • For information about the initial defaults of the System Admin page settings, see “System Admin Page Settings” (page 36). 31 System Admin Page Operations and Settings System Admin Page Operations and Settings While the projector is connected to a computer via wireless LAN, you can use the computer’s ...

Download now

Please, enter two numbers from picture: