Then install the Array1000™ Windows NT Workstation driver and CI/O Workstation Array Management software during Windows NT Workstation setup. It’s that easy. Array management Adaptec CI/O Workstation Array Management software takes the complexity out of array management. Built- in performance profiler, cache performance optimization, and performance monitoring tools allow you to tune your PC workstation array’s performance settings for your particular application’s requirements. Tuning performan

¦ Maximum Sync Transfer Rate—This option determines the maximum synchronous data transfer rate that the AAA-131CA adapter supports. The default setting is 10.0 MBytes/sec. (The effective data transfer rate is doubled when Initiate Wide Negotiation is set to Yes. For example, a transfer rate of 10 MBytes/sec becomes 20 MBytes/sec.) ¦ Enable Disconnection—This option determines whether the AAA-131CA adapter allows the SCSI device to disconnect from the SCSI bus (sometimes called Disconnect/Reconne

Adaptec Array1000CA Family Array Management Guide ¦ Maximum/Minimum Stripe Size: lists the range of data and parity stripe sizes that the product supports. ¦ Spare Pool: indicates that the product supports using spares from a spare pool. Click Close to close the Capabilities dialog box and the Controller Information dialog box. Viewi ng Cha nn el I n f o r m a t ion When you double-click a channel icon , the Channel Information dialog box appears, as shown in Figure 4-4. Figure 4-4. Channel Info

Once the option is selected, SCSISelect immediately scans the SCSI bus (to determine the devices installed) and displays a list of all SCSI IDs and the devices assigned to each ID. When you select a specific ID and device, a small menu appears, displaying the options Format Disk and Verify Disk Media. ¦ Format Disk—This utility allows you to perform a low-level format on a hard disk. Each hard disk must be low-level formatted before you can use your operating system’s partitioning and file prepa