|
manual abstract
Unpack Your AeroGarden A Base (front view) Lamp Arm (back view) Lamp Hood (front view) Grow Bulbs (2) Plug Lamp Cord into Lamp Hood D Push Lamp Cord firmly into socket in Lamp Hood. Lamp Cord Insert Lamp Arm into Base B Seed Kit Insert Grow Bulbs into Lamp Hood C Lamp Hood (bottom view) Bowl Push Lamp Arm down until you hear a “click.” Lamp Arm (back view) Base (back view) Push straight in. DO NOT TWIST BULBS! 1 Quick Start Assembly (continued) 1 Quick Start Assembly (continued) Set Bowl into Base F (front view) Place Lamp Hood on Lamp Arm E Center hands over Lamp Arm and push Lamp Hood down until you hear a “click.” (back view) Check to be sure that Bowl is securely in place. 3 Use one hand to grasp Lamp Arm. Gently slide AeroGarden toward the surface edge and place other hand under Base. Moving Your AeroGarden G Wonderful Stuff 68°F/20°Cnote: do not place beneath under-cabinet lights. Near: A standard electrical outlet, per local regulations Under: A space that allows 22” (56cm) clearance for the full height of raised lamp On: A sturdy, water- tolerant surface (Metal surfaces may cause noise due to vibration) In: A 60-75°F (16-24°C) environment (optimal) Place Your Garden H Away From Reach of children and pets Direct sources of heat (e.g., stove, furnace vents) Direct sources of cold air (e.g., window drafts, A/C vents) For Optimal Tending & Harvesting, Also Consider Easy access to un-softened water Wonderful Stuff 68°F/20°Cnote: do not place beneath under-cabinet lights. Near: A standard electrical outlet, per local regulations Under: A space that allows 22” (56cm) clearance for the full height of raised lamp On: A sturdy, water- tolerant surface (Metal surfaces may cause noise due to vibration) In: A 60-75°F (16-24°C) environment (optimal) Place Your Garden H Away From Reach of children and pets Direct sources of heat (e.g., stove, furnace vents) Direct sources of cold air (e.g., window drafts, A/C vents) For Optimal Tending & Harvesting, Also Consider Easy access to un-softened water 5 Add Water Using a Spouted Container A 2 Planting Your Garden Plant Your Garden B Lift View door Fill to “Fill To Here” (located inside the Bowl) When additional water is needed, “Water Level Low” light on Control Panel will blink. Add water to raise level up to “Fill To Here” inside Bowl. It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks. Seed Kit Tray Seed Pod Bio-Domes™ Nutrients Insert Seed Pods into Grow Surface openings. Check to see that… • Seed Pods are in the same position in Grow Surface as they were in Seed Kit Tray. • Seed Pod Labels are facing forward. • Seed Pods are pressed firmly in place. Grow Surface Use room temperature municipal tap, bottled or purified water. Do not use well or softened water. Amount of Water To Be Added: 3.5 quarts or... 3.2 liters 5 Add Water Using a Spouted Container A 2 Planting Your Garden Plant Your Garden B Lift View door Fill to “Fill To Here” (located inside the Bowl) When additiona...
Other models in this manual:Other Home Accessories - AeroGarden 100629 (924.55 kb)
Other Home Accessories - AeroGarden 100710-WHT (924.55 kb)
Other Home Accessories - AeroGarden 200710-BKG (924.55 kb)
Other Home Accessories - AeroGarden 200710-BLK (924.55 kb)