Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Press for to Lock in the set temperature. Notice the lock icon ..solid on the display. No temperature changes are allowed. Press to remove the “Heat Lock” of the heater. Notice that the lock icon will disappear. All spa functions, including temperature adjustment will be accessible. G. PANEL LOCK ..................................................................... The ICSTM controller also allows you to lock the spa Control Center to keep children or others from using any of the spa functions. To block all buttons, while the display shows “PL” press . Notice the flashing lock icon ..on the display indicating the Control Center is locked. To unlock the Control Center, press again. “PL” will display, press . The flashing lock icon will disappear and all spa functions will be accessible. H. DISPLAY ........................................................................... The Control Center display can be inverted to allow easier reading from inside the spa. While the display shows “FLIP”, press or to invert the display back and forth. I. ADVANCED FEATURES SETUP............................................ Refer to the ADVANCED FEATURES SETUP section. To exit programming mode at any point in the sequence, press any button other than , or , or wait for 10 seconds (without pressing any button). PAGE1412/24 HOUR MINUTES MONTH DAY YEAR continues on next page GOES BACK TO THE BEGINNING USE ARROWS TO CHANGE ..TO LOCK ..TO UNLOCK ..TO LOCK ..TO UNLOCK SWIM PROGRAMMING INSTRUCTIONS E. CLOCK AND CALENDAR SETTING ...................................... The display will sequence through the time and calender settings as is pressed. Sequence is: “H=12” – 12-hr or “H=24” – 24-hr clock Hours setting Minutes setting Month setting Day setting Year setting Use and to change blinking digits. F. HEAT LOCK ....................................................................... The ICSTM controller allows you to prevent anyone from changing the water temperature you have chosen, while still allowing the use of any of the spa functions. While the display shows “HL” Heater Lock position. Press for to Lock in the set temperature. Notice the lock icon ..solid on the display. No temperature changes are allowed. Press to remove the “Heat Lock” of the heater. Notice that the lock icon will disappear. All spa functions, including temperature adjustment will be accessible. G. PANEL LOCK ..................................................................... The ICSTM controller also allows you to lock the spa Control Center to keep children or others from using any of the spa functions. To block all buttons, while the display shows “PL” press . Notice the flashing lock icon ..on the display indicating the Control Center is locked. To unlock the Control Center, press again. “PL” will display, press . The flashing lock icon will disappear and all spa functions will be accessible. H. DISPLAY ........................................................................... The Control Center display can be inverted to allow easier reading from inside the spa. While the display shows “FLIP”, press or to invert the display back and forth. I. ADVANCED FEATURES SETUP............................................ Refer to the ADVANCED FEATURES SETUP section. To exit programming mode at any point in the sequence, press any button other than , or , or wait for 10 seconds (without pressing any button). PAGE14 8s xStream xStream Pro xStream Duo Pro GOES BACK TO THE BEGINNING OF THE ADVANCED SETTINGS USE ARROWS TO CHANGE VALUE SWIM ADVANCED PROGRAMMING INSTRUCTIONS DO NOT ENTER THIS SECTION UNLESS INSTRUCTED BY A QUALIFIED TECHNICIAN ** IMPROPER CHANGES MAY CAUSE MALFUNCTION OR DAMAGE YOUR SPA AND MAY VOID THE WARRANTY! ** ADVANCED FEATURES SETUP To exit programming mode at any point in the sequence, press any button other than , or , or wait for 10 seconds (without pressing any button). A1. SETUP ("SU") ................................................................. While the display shows “SU” enter the Advanced Programming Menu by holding down for 8 seconds. A2. PUMP SETUP................................................................... The Swim Control of the xStream spas has been factory programmed, and should be: xStream “P=3C” ONLY. xStream Pro and Duo Pro “P=2C” ONLY. A3. POWER SERVICE LEVEL .................................................. The Swim Control of the xStream spas should be set to “S=0” ONLY. This indicates that the heater will shut off when any pump is turned on high speed, except for the filtration (circulation) pump. Warning! Changes to this setting may cause inadvertent breaker tripping and strain your power connections. If so, this would void your warranty. A4. COUNTRY........................................................................ This setting is used for the FM Stereo tuning, if so equipped. It should be set to “CO=U” for the US and Canada, “CO=E” for Europe and “CO=J” for Japan. A5. AUX BUTTON (BLOWER)......................
Other models in this manual:Other Home Accessories - xStream (4.31 mb)
Other Home Accessories - xStreamDuoPro (4.31 mb)