0 (12/00) Page 1 of 4 OPERATING and MAINTENANCE INSTRUCTIONS For CCB-96A and CCB-120A Banquet Warming Cabinets Insulated Banquet Cabinets FL-2247 Rev. 0 (12/00) Page 2 of 4 CRES cor, 5925 Heisley Road • Mentor, OH 44060-1833 B77/CRES COR (273-7267) • 44G/35G-11GG Fax: 44G/35G-7267 • OPERATING and MAINTENANCE INSTRUCTIONS For CCB-96A and CCB-120A Banquet Warming Cabinets HOW TO CLEAN UNIT: AWARNING BEFORE CLEANING CABINET: 1. Allow cabinet to cool. 2. Remove Hot Unit BEFORE cleaning. (

Circuit breaker/fuse to wall outlet is blown, lb. Cord is unplugged from wall outlet, lc. Switch turned OFF. 2a. Thermostat set too low or is OFF. 2b. Switch turned OFF. 3a. Defective electrical parts. UNPLUG UNIT FROM WALL OUTLET. 4a. Defective blower. 5a. Foods taken from oven or fryer should be “slacked out” for 5 minutes before placing in hot cabinet. If cause is none of the above, refer to our list of Authorized Service Centers, FL-1400. DESCRIPTION For Canadian Use:* Hot Unit (120

NEMA *NEMA 120 1650 13.8 60 1 AC 5-15P 5-20P 240 1650 6.9 60 1 AC 6-15P 6-15P * For Canadian use HOW TO INSTALL UNIT: 1. Remove all packing materials from inside thecabinet. 2. Install all angles and shelves before the unit isturned on. 3. Plug the power cord into the proper wall outlet. HOW TO START UNIT: 1. Push the power switch to “ON”. Yellow light will turn on. 2. Turn the thermostat to #10 (220°F/105°C). 3. Preheat (assuming a “cold” cabinet of 75°F/25°C) a) To 150°F/65°C takes 20 minutes

1 (10/08) Page 3 of 4 5925 Heisley Road • Mentor, OH 44060-1833 OPERATING and MAINTENANCE INSTRUCTIONS for CCB-96A and CCB-120A Banquet Warming Cabinets TROUBLE-SHOOTING CHART: FAILURE POSSIBLE CAUSE 1. Yellow light at switch does NOT light. 1a. Circuit breaker/fuse to wall outlet blown. 2a. Cord is unplugged from wall outlet. 3a. Switch is “OFF.” 2. Unit does not get hot. 3. Unit gets too hot or won’t shut off 2a. Thermostat set too low or are off. 2b. Switch is “OFF.” 3a. Defective electrical

Volts Watts Amps Hertz Phase NEMA EB-150 120 *EB-150-CAN 120 EB-150-208 208 EB-150-240 240 1500 1500 12.5 12.5 60 60 1 1 5-15P 5-20P 1500 7.3 60 1 6-15P 1500 6.3 60 1 6-15P Models are designed for AC Service. *For Canadian use. HOW TO INSTALL UNIT: TO TURN OFF UNIT: 1. Remove all packing material from inside the Push the POWER switch to “OFF”. cabinet and clean cabinet thoroughly. The yellow light will go out. 2. Install all channels and shelves before the unit is put into operation. 3. Plug the

Models designed for AC service HOW TO INSTALL UNIT: 1. Remove all packing material from inside the cabinet and clean cabinet thoroughly. 2. Install all channels and shelves before the unit is put into operation. 3. Plug the power cord into the proper wall outlet. HOW TO START UNIT: 1. Push power switch to ON. The yellow light will turn on. 2. Turn thermostat to #10. 3. Preheat (assuming a “cold” cabinet of 75°F/25° C): (a) To 150° F/65°C takes about 30 minutes. (b) To 175°F/79°C takes