Login:
Votes - 3, Average rating: 4 ( )

User manual Cres Cor, model Banquet Warming Cabinet CCB150 Series

Manafacture: Cres Cor
File size: 518.34 kb
File name: FL-2246_Rev._0.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Models designed for AC service HOW TO INSTALL UNIT: 1. Remove all packing material from inside the cabinet and clean cabinet thoroughly. 2. Install all channels and shelves before the unit is put into operation. 3. Plug the power cord into the proper wall outlet. HOW TO START UNIT: 1. Push power switch to ON. The yellow light will turn on. 2. Turn thermostat to #10. 3. Preheat (assuming a “cold” cabinet of 75°F/25° C): (a) To 150° F/65°C takes about 30 minutes. (b) To 175°F/79°C takes about 45 minutes. (c) To 190°F/88°C takes about 1 hour. 4. Put food into the cabinet. 5. Turn thermostat to the required temperature. NOTE: No.8 is about 175°F/79°C. No.7 is about 160°F/71°C. No.6 is about 145°F/63°C. Proper food holding temperature is 140°F/60°C or higher. TO TURN OFF UNIT: Push the power switch to OFF. The yellow light will go out. PARTS IDENTIFICATION 1. Thermostat 2. Power Switch 3. Yellow Indicator Light 4. Temperature Display Insulated Banquet Cabinet FL-2246 Rev. 0 (12/00) Page 1 of 4 CRES cor. 5925 Heisley Road • Mentor, OH 44060-1833 877/CRES COR (273-7267) • 440/350-1100 Fax: 440/350-7267 • Insulated Banquet Cabinet FL-2246 Rev. 0 (12/00) Page 2 of 4 OPERATING and MAINTENANCE INSTRUCTIONS Model CCB150 Series Banquet Warming Cabinet W CRES cor. 5925 Heisley Road • Mentor, OH 44060-1833 877/CRES COR (273-7267) • 440/350-1100 Fax: 440/350-7267 • Insulated Banquet Cabinet FL-2246 Rev. 0 (12/00) Page 3 of 4 OPERATING and MAINTENANCE INSTRUCTIONS Model CCB150 Series Banquet Warming Cabinet TROUBLE-SHOOTING FAILURE 1. Yellow light at switch does not light. 2. Unit does not heat. 3. Unit gets too hot or won’t shut off. 4. Blower does not work or makes noise. 5. Excess moisture in cabinet. CHART: Possible Cause la. Circuit breaker/fuse to wall outlet blown, lb. Cord unplugged from wall outlet, lc. Switch is OFF. 2a. Thermostat set too low or is OFF. 2b. Switch is OFF. 3a. Defective electrical parts. UNPLUG UNIT FROM WALL OUTLET. 4a. Defective Blower. 5a. Open vent. 5b. “Slack out” foods from oven or fryer for 5 minutes before putting in hot cabinet. If cause is none of the above, refer to our list of Authorized Service Centers, FL-1400. For Canadian Use:* Hot Unit (120 Volt)............HU18671164C Power Cord Plug...............0713-017 REPLACEMENT PARTS: CABINET PARTS: DESCRIPTION 120 Volt 240 Volt DESCRIPTION CMP Part No. Hot Unit.................... ..........HU18671164*...... ......HU18671165 Door Latch..................... .. 1006-143-K Blower Kit............... .......... 0769-005-K.......... ...... 0769-006-K1 Door Strike......................... ........1006-144-K Heater Kit................ ..........0811-214-01......... ......0811-215-01 Door Hinge 0519-084 Thermostat Kit........ .......... 0848-062-K.......... ...... 0848-062-K 0861-225 Thermometer Kit..... .......... 5238-030-K.......... ...... 5238-030-K Door Ass’y. Complete........ ........1221-462-K Power Cord.............. .......... 0810-029-02*....... ...... 0810-039-03 Wire Grid............................ ........1170-041 Power Switch.......... .......... 0808-118 .............. ...... 0808-116 1079-080 Pilot Light................ .......... 0766-094 .............. ,0766-095 Utility Drawer.................... ........5069-008 Center Channel Ass’y......... ........1043-041-K W CRES cor. 5925 Heisley Road • Mentor, OH 44060-1833 877/CRES COR (273-7267) • 440/350-1100 Fax: 440/350-7267 • Insulated Banquet Cabinet FL-2246 Rev. 0 (12/00) Page 4 of 4 OPERATING and MAINTENANCE INSTRUCTIONS Model CCB150 Series Banquet Warming Cabinet...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category