5-year parts and 1-year labor warranty on compressor and 3-year parts and labor warranty on electronics. See the product manual for additional details. • Sanitation listed by NSF to Standard 6 and 18 (including dairy & alcohol) and safety listed by ETL to UL Standard (UL 471) and csA Standard (c22.2 No. 120). • White/Stainless, Black,Stainless and all Black finishes available. • International electrical configurations available. Ultra-1 Dimensions: 31.9”H x 7.9”W x 24.2”D (81 cm H x 20.1 c
5-year parts and 1-year labor warranty on compressor and 3-year parts and labor warranty on electronics. See the product manual for additional details. • Sanitation listed by NSF to Standard 6 and 18 (including dairy & alcohol) and safety listed by ETL to UL Standard (UL 471) and csA Standard (c22.2 No. 120). • White/Stainless, Black,Stainless and all Black finishes available. • International electrical configurations available. Ultra-1 Dimensions: 31.9”H x 7.9”W x 24.2”D (81 cm H x 20.1 c
: 34141.0000 Dimensions: 233/8" H x 6" W x 73/8" D 59.4 cm H x 15.2 cm W x 18.7 cm D Easy Clear® ED-HB-2 20" Replacement Cartridge Product No. : 34134.0000 Single/Dual Filter Pack Product No. : 20100.0000 Packed per case: 500 Dimensions: 51/." Base x 33/„" Sidewall 4 4 13.34 cm Base x 9.52 cm Sidewall TDO-4-Tea Dispenser Product No.: 34100.0002 Capacity: 4 gallons Weight: 13 lbs. (5.9 kg) Dimensions: 19”Hx 10.7” W x 13.7” D 48.26 cm Hx 27.18 cm Wx 34.8 cm D TD4T - Tea Dispenser Prod
See page 16 or 17. Remove the Brew Solenoid Valve and clean any obstruction. Rebuild or replace the valve if necessary. See page 15. BUNN® paper filters must be used for proper extraction. A sufficient quantity of fresh, loose tea leaves should be used for proper extraction. A clean stainless steel sprayhead must be used for proper extraction. 10288 031604 TROUBLESHOOTING (cont.) PROBLEM Weak beverage (cont.) Dry tea leaves remain in the funnel Brewer is making unusual noises PROBABLE CAUSE 4. F
: 34141.0000 Dimensions: 233/8" H x 6" W x 73/8" D 59.4 cm H x 15.2 cm W x 18.7 cm D Easy Clear® ED-HB-2 20" Replacement Cartridge Product No. : 34134.0000 Single/Dual Filter Pack Product No. : 20100.0000 Packed per case: 500 Dimensions: 51/." Base x 33/„" Sidewall 4 4 13.34 cm Base x 9.52 cm Sidewall TDO-4-Tea Dispenser Product No.: 34100.0002 Capacity: 4 gallons Weight: 13 lbs. (5.9 kg) Dimensions: 19”Hx 10.7” W x 13.7” D 48.26 cm Hx 27.18 cm Wx 34.8 cm D TD4T - Tea Dispenser Prod
TU3 HOT L I Q U I D ! CAUTION OPERATING & SERVICE MANUAL BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 10225.0000N 03/04 ©1987 Bunn-O-Matic Corporation CONTENTS Introduction .....................................................................2 Warranty ..........................................................................2 User Notices ....................................................................3 Electrical &
SplashGard® funnel and funnel locks help improve safety. Funnel has 28 ounce (.8 kg) ground coffee capacity and paper filter retainers to eliminate fold-over. Titan TF servers are insulated to keep coffee hot for hours. Hot water faucet. Energy-saver mode reduces tank temperature during idle periods. Model Titan Dual Brewer with 3 gallon TF Servers (servers sold separately) Dimensions: 40.02” H x 35.63” W x 21.74” D (101.7cm Hx 90.5cm Wx 55.2cm D) For current specification sheets and othe
Brew, Dual, EasyClear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Intellisteam, Quality Beverage Equipment Worldwide, The Mark of Quality in Beverage Equipment Worldwide, My Cafe, PowerLogic, Safety-Fresh, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, System III, ThermoFresh, 392, AutoPOD, AXIOM, Beverage Profit Calculator, Beverage Bar Creator, BUNNsource, Coffee At Its Best, Digital Brewe
10334 012609 3 CLEANING CAUTION - CLEAN AND SANITIZE YOUR ICED TEA/COFFEE DISPENSER DAILY 1. Twist the faucet wing nut in a clockwise direction and remove the faucet from the dispenser. 2. Thoroughly clean the entire inside surface of the dispenser and the faucet shank with the #00674.0000 brush using a mild detergent and water solution. Rinse the dispenser and shank with warm water. 3. Disassemble the faucet. The faucet cleaning procedure requires a 3-compartment sink. Thoroughly wash all fauce
6. Carefully bend the capillary tube so that the tube and bulb inside the tank are in a vertical position. NOTE: The capillary tube must be clear of any electrical termination and not kinked. 7. Fasten the new control thermostat to its bracket. 8. Refer to Fig. 7 when reconnecting the wires. 9. Adjust the control thermostat as required. BUNNOFF BLK to Tank Heater (100/120V) Thermal Fuse (230V) BLU/BLK to Limit Thermostat P2090.80 FIG. 7 CONTROL THERMOSTAT TERMINALS 37236 080504 Page 19 SERVICE (