1) Estrarre il vassoio dalla stampante. 2) Per caricare la carta nel vassoio 1, sollevare e rimuovere il vassoio di raccolta. 6 3 2 1 1 7 3 4 5 6 3 4 5 6 3) For paper between 11 inches and 14 inches (356 mm and 279 5) Slide the guides in the tray to adjust them for the size that you mm) long, move the latch on the tray to the right; 4) then lower the are loading. 6) Insert up to 150 sheets of paper into Tray 1 or 250 front of the tray. sheets of paper into Tray 2. Note: Tray 2 can be loaded only

• HP Instant Support (vedere la Guida in linea) • Sito assistenza prodotti 14 Control panel 18210964357 1Power button ( ): Turns the printer off and on. 2Help button ( ): Provides additional information about printer messages or menus. 3 Attention light ( ): Indicates one of three possible states: Off — No conditions exist that require attention. A printer-status message usually accompanies this indicator. Flashing — The printer has encountered an error that requires user attention (such as an o

Control panel light pattern Explanation and recommended action Configuration page button is off. The Power light is on. The printer is turned on and idle. It is connected using a USB or parallel cable. No action is required. The printer is turned on and idle. It is connected to a network using a network cable or wireless communication. If the printer is connected using a network cable, check the network connector lights to verify that the printer is connected to the network. See “Interpreting ne

Note If you are sending a multiple-page fax, you must load the originals in the document feeder tray. You cannot fax a multiple-page document from the glass. 2. Press Start Fax Black or Start Fax Color. – If the device detects an original loaded in the automatic document feeder, you will hear a dial tone. – If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded on the glass, and then press 1 to sele

1) HP Business Inkjet 2300 series printer, 2) installing supplies flyer, 3) power cord, 4) ink cartridges and printheads, 5) printed documentation (setup poster, getting started guide, HP customer support guide), 6) Starter CD (software and electronic documentation), 7) Tray 2, 8) auto-duplex unit (HP Business Inkjet 2300dtn only) Step 2: Prepare the location. The surface must be sturdy, level, and located in a well-ventilated area. Allow space around the printer, including 50 mm (2 inches) for

......... Информация о технике безопасности .. ........... ..... ... ....... ........... ......... .... .............. .. ..... ...... ... .. ........ ... ....... ............ ... ........ . .............. 1 ........ ... .......... .... ... ....... ... .......... ... ......... ... ......... 2 .............. .... ........ ......... ..... .... ........ .. ...... .... ...... ......... .. .. ......... .. . ..... ..... ........ , ....... .. ............ ............ 3 ....... .... ... ...............

2 Press the printer’s Configuration Page button to print the configuration pages. 3 Click the Apple menu, point to Control Panels, click TCP/IP, and then do the following: a Click File, and then click Configurations to open the Configuration dialog box. b Click Duplicate, enter HP Business Inkjet 1200, and then click OK. c Click Make Active to close the Configuration dialog box. 22 d From the Connect via menu, select AirPort. e From the Configure menu, select Manually. f Enter the printer’s Subn

5 Step 4: Install the output tray. 1) Unpack the output tray. 2) Align the guides on the output tray with the grooves on the printer. 3) Push in to lock the left side of the tray, then the right side. 4) Lower the tray to its horizontal position. Step 5: Connect the power cord and turn on the printer. 1) Connect the power cord to the printer and an alternating current (AC) power receptacle. 2) Press the Power button to turn on the printer. Note: Only connect the printer to the computer when you

For more information about opening the EWS, see “Embedded Web server (EWS)” on page 21. 21 To configure security options 1 Connect a cross cable (included with the HP Business Inkjet 1200dtwn) to the printer and the computer. 2 Open the printer’s Embedded Web Server (EWS). 3 Click the Networking tab, and then click Wireless (802.11) in the left pane. 4 On the Wireless Setup tab, click Start Wizard. 5 Follow the instructions on the screen. 6 Click Apply, and then close the EWS. To add hardware ad