Votes - 5, Average rating: 4.4
(
)
)
|
Other manuals for this model:
manual abstract
You can press the corresponding number shown on the display to select the paper size. 3 To return to Standby mode, press Stop/Clear. To set the paper size for the bypass tray, take the following steps: 1 Press Menu/Exit and then System Data from the one- touch dial keypad. SCX-5112 users should press Menu and then Enter. The display shows “CASSETTE PAPER” on the top line and the available options on the bottom line. 2 Use to display “BYPASS TRAY” on the top line. The available options appears on the bottom line and the current setting blinks. 3 Use or to select the paper size you are using, and press Mode/Enter (Enter for SCX-5112) to save the selection. You can press the corresponding number shown on the display to select the paper size. 4 To return to Standby mode, press Stop/Clear. 3 PAPER HANDLING 3.9 NOTE PAPER HANDLING3.10 4 4 COPYING This chapter provides step-by-step instructions for copying documents. This chapter includes: • Loading Paper for Copy Output • Selecting Paper Tray • Making Copies from the Automatic Document Feeder • Making Copies on the Document Glass • Setting Copy Options • Auto Fit • Clone • Duplex Copy • Collation Copy Loading Paper for Copy Output You can copy to a size of media as small as an index card (3.9 by 5.8 inch) or as large as a sheet of legal-sized (8.5 by 14 inch) paper. The instructions for loading the print media are the same whether you are printing, faxing, or copying. For details, see page 1.17 and 3.6. Selecting Paper Tray After loading print media for copy output, you have to select the paper tray you will use for the copy job, and the fax job (SCX-5312F only). 1 Press Paper Tray. The current setting appears on the bottom line of the display. 2 Select “CASSETTE” or “BYPASS” by pressing Paper Tray repeatedly or using the navigation buttons, and press Mode/Enter (Enter on SCX-5112) to save the selection. 3 If you selected “BYPASS” at the step 2, the display prompts you to select the PAPER TYPE for the bypass tray. Use the navigation buttons to select the paper type you are using in the bypass tray. 4 Press Mode/Enter (Enter on SCX-5112) to save the selection. COPYING Making Copies from the Automatic Making Copies from the Automatic Document Feeder Using the ADF(Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m2) in one job. Ensure documents are in good condition, have the same thickness and weight, and that all staples and paper clips have been removed. 1 Feed the documents (up to 30 pages) face up into the ADF and adjust the document guides to the document size. Make sure that the bottom of the document stack matches the paper size marked on the ADF. 4 Document guides 2 SCX-5312F users should verify that the product is in the Copy mode. If necessary, press Mode/Enter to change the mode into the Copy mode. In the Copy mode, the LCD display shows: Copy size Number of copies Note that you cannot make copies in the Fax mode. The product will only sound an error beep. 3 Make sure that you have selected the required paper tray. See page 4.2. 4 Customise the copy settings incluing the number of copies, copy size, contrast and image type using the control panel buttons. See “Setting Copy Options” on page 4.6. To clear the settings, use the Stop/Clear button. 5 If necessary, you can use special copy features such as collation and duplex copy. COPYING 4.3 6 Press Copy/Start to begin copying. The display shows the copy processing. NOTE: Dust on the ADF glass may cause the black lines on the printout, so keep it always clean. Making Copies on the Document Glass If you want to make copies from booklet, pamphlet, transparencies, or documents having other unusual characteristics, use the document glass to load document. 1 Lift the document cover. 2 Place the document face down on the glass and align it with registration guide on the left top corner of the document glass. COPYING4.4 NOTE: Make sure that no other documents are in the ADF. If a document is detected in the ADF, the document has a priority than the document on the glass. NOTE: Make sure that no other documents are in the ADF. If a document is detected in the ADF, the document has a priority than the document on the glass. 3 Close the document cover. NOTE: • Leaving the cover open while copying will affect the copy quality and toner consumption. • If you are copying a page from a book or magazine, close the cover flat. The slanted cover may cause heavy exposure of the light when scanning. 4 SCX-5312F users should verify that the product is in the Copy mode. If necessary, press Mode/Enter to change the mode into the Copy mode. In the Copy mode, the LCD display shows: Number of copies Copy size 4 Note that you cannot make copies in the Fax mode. The product will only sound an error beep. 5 Make sure that you have selected the required paper tray. See page 4.2. 6 Customise the copy settings incluing the number of copies, copy size, contrast and image type using the control panel buttons. See “Se...
Other models in this manual:Printers - SCX-5312F (3.66 mb)