Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
GENERAL OUTLINE CMP-20 is a compact, full featured portable line thermal printer, which can be used in a large variety of job environments. Bluetooth/WiFi communication with a PDA or similar device is useful for business activities at the point of sale or service. 1.1 Features • Compact and Robust • High speed and low noise emission of the line thermal printing • Long-life printing head with high reliability • Easy paper-handling, owing to the paper-drop-in style • Lithi um-ion rechargeable battery • 3 LED to indicate battery status • Equipped with USB and serial port as standard • Built-in Bluetooth function (CMP-20BT) • Built-in Wi-Fi function (CMP-20WF) • Built-in magnetic stripe reader (Option) • Built-in IC card reader (Option) -13- 1.2 Unpacking Standard Battery (CMP-BA20) Printer Charger EU Plug (CMP-AD20US) Paper Roll CD-ROM Serial Cable (CA20-S01) Quick Start Guide -14- Option Battery Cradle (CMP-BC20) Leather Case (SC20-01) Car Charger USB Cable (CMP-CC20) (CA20-U01) Strap (STP20-01) -15- 1.3 Model Classifications Classified by the following designation. CMP-20BT U M L Reader None : Without reader M : Magnetic stripe reader C : IC card reader MC : Magnetic stripe reader + IC card reader - Destination U : North America/Europe Interface None : USB and Serial BT : USB, Serial and Bluetooth WF : USB, Serial and WiFi — 16 — 1.4 Basic Specifications Printing Method Direct line thermal printing Printing Speed Max. 80mm/sec Resolution 203 DPI x 203 DPI Print width 48mm, 384dot Character ALPHA NUMERIC Character, Extension Character 18 codepages, 14 international characters Font Font A (12 x 24 dot), Font B (9 x 17 dot) Number of columns 32 (Font A), 42 (Font B) Barcode EAN-8, EAN-13, Code39, ITF, UPC-A, Codabar, Code93, Code128, PDF417(2D) Emulation ESC/POS Driver Window CE 4.2&5.0, Window Mobile 5.0 Sensor Paper End Sensor, Gap Sensor, Cover Open Sensor Paper Paper type Thermal Paper Width 58mm Thickness 65pm External Diameter Max. 0 48mm Internal Diameter 12.5mm +/-0.5mm Reliability Thermal Head 50km Battery Continuous printing for 90min Standby for 24hours Communications Standard Serial(RS-232C), USB, Bluetooth Class2 (CMP-20BT), Wireless Lan 802.11b/g (CMP-20WF) MSR (Optional) Card Standard ISO7811/2 Track Track1, Track2,Track3 Magnet Head Life 300,000 Passes (minimum) IC CARD (Optional) EMV level one certified smart card reader Battery Charger Input AC100~240V, 50/60 Hz Output 8.4V , 1200 mA Battery Battery type Li-ion Output 7.4V, 1800mAh Charging time 2 hours Size 96(W) x 136(D) x 58(H) mm 3.7(W) x 5.3(D) x 2.2(H) inch Temperature Operation 5~40C Storage -10~50C Humidity Operation 35 ~ 95% Storage 10 ~ 95% -17- 2. EXPLANATION OF PRINTER PARTS 2.1 Printer Appearance (1) (1) Paper Cover Set paper roll inside this cover. (2) Manual Cutter (Tear Bar) To cut the printed paper, gently pull the paper from the edge of the paper at the angle so that paper firmly contacts the serrated cutter. (3) Power Button Press and hold the Power button for approximately 3 seconds to turn the printer power ON. To turn OFF the printer, press and hold the Power button until the Power LED gets off. (4) Paper Cover Open Button (blue colour) Press down to open the paper cover for replacing the paper roll. (5) Paper Feed Button Press once for 1 line paper feed. Press down and hold for continuous paper feed to any required length. -18 — (6) Control Panel Refer to section 2.2 Operation Panel. (7) DC jack Connect Charger for recharging battery. (8) MSR Slot (Optional) Swipe magnetic stripe. (9) IC Card Slot (Optional) Insert IC card. (11) -(10) (13) (10) Battery Refer to section 3.3 Installing Battery to 3.5 Removing Battery (with Belt Clip). (11) Belt Clip Hole Refer to section 3.2 Installing Belt Clip. (12) USB Port (Mini B connector) For USB cable connection to host. (13) Serial port For serial cable connection to host. -19 2.2 Operation Panel Button/LED Name Function Power Button This button is used to turn the printer on and off. When the printer is off, press this button for approximately 3 seconds and it will turn on the power. When on, pressing the button will switch off the printer. Paper Feed Button Paper can be fed manually by pressing this button. Additionally, a self-test can be produced - refer to “3.8" for self test information. Batt /—? Battery Status LED 1. If all three of the “Batt“ LEDs are lit, the battery is fully charged. 2. If you can hear beeping sound and all lights are turned off, it means that the battery is at the lowest level. 3. If the battery is not charged at all, the printer turns off automatically. Error Error LED If the red light is turned on, it means there is no paper roll or the paper cover is open. NOTE 1. The battery status LEDs give an indication of power remaining. Actual run-time remaining will depend on many factors such as the conten...