Votes - 5, Average rating: 5 ( )

Manafacture: Electrolux File size: 1.01 mb File name: 47b44b1a-01ee-402b-9690-5f5ed5dec7f4.pdf Language of manual:

Load dishwasher (See Preparing and Loading Dishes). Appearance may vary from your model. 2. Add detergent (See Dishwasher Dispenser & Detergents). 3. Add rinse aid, if needed (See Rinse Aid). 4. Turn dial clockwise to select cycle (See Cycle Chart) or number of hours for delay start. 5. Select desired energy OPTIONS (See Energy Options). The indicator will show red when selected. 6. If using DELAY START, go to step number 9. 7. For instructions on connecting the portable dishwasher, see “Connecting and Disconnecting the Portable/Convertible Dishwasher.” 8. Run hot water faucet nearest dishwasher until water is hot. Turn water off. 9. To start, close door to latch. Delay Start Allows you to delay starting the POTS & PANS cycle. • Turn dial to select number of hours. • Select HI-TEMP WASH ON option and other desired options. • Close door to latch. The DELAY START light (available select models) will come on. Plate Warmer (available select models) For warming dishes and serving plates before serving hot foods: • Load clean plates and dishes to be warmed. • Turn dial to PLATE WARMER. • Select HEAT DRY ON option. 4 Operating Instructions (continued) Wash Cycle Selections Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models. Cycle Chart Cycle Description To Select Cycle Water (approx.) Time* (approx.) Washes/ Rinses Pots & Pans For pots, pans, casseroles, and dinnerware with dried- on or baked-on soils. • Turn dial to POTS & PANS/HEAVY WASH. • Select HI-TEMP WASH ON option. • Select other desired OPTIONS. gal. imp. gal. liters 7.2 6.0 27.3 82 min. 2 washes 4 rinses Heavy Wash For heavily soiled dishes and silverware. • Turn dial to POTS & PANS/HEAVY WASH. • Select desired OPTIONS. gal. imp. gal. liters 7.2 6.0 27.3 82 min. 2 washes 4 rinses Normal Wash For regularly soiled dishes and silverware. • Turn dial to NORMAL WASH. • Select desired OPTIONS. gal. imp. gal. liters 6.0 5.0 22.7 76 min. 2 washes 3 rinses Light Wash For lightly soiled or pre-rinsed dishes and silverware. • Turn dial to LIGHT WASH. • Select desired OPTIONS. gal. imp. gal. liters 4.8 4.0 18.2 69 min. 1 wash 3 rinses Rinse/ Hold For rinsing dishes that will be washed later. • DO NOT USE detergent. • Turn dial to RINSE/HOLD. (Models with SANITIZE option, select SANITIZE OFF and HEAT DRY OFF.) gal. imp. gal. liters 1.2 1.0 4.5 4-12 min. 1 rinse Energy Options Hi-Temp Wash Option When HI-TEMP WASH ON option is selected, the dishwasher heats the water in the main wash to approximately 140°F (60°C). Wash action will continue but timer will not advance until proper temperature is reached. The hotter water provided by this option helps activate dishwasher detergent to clean food grease and soil from dishes. HI-TEMP WASH ON option can be used with any cycle except RINSE/HOLD. To turn off option, select HI-TEMP WASH OFF. Sanitize Option (available select models) To sanitize your dishes and glassware, select the SANITIZE ON option. The water temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes. This option is available in Pots & Pans, Heavy, Normal and Light cycles. The cycle time will be extended until the proper water temperature is reached. * Includes dry time. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F(49°C). The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure, or if the incoming water temperature is below 120°F(49°C). Hi-Temp Rinse Option (available select models) When HI-TEMP RINSE ON option is selected, the dishwasher heats the water in the final rinse to approximately 140°F (60°C). This will speed drying and reduce spotting. HI-TEMP RINSE ON option can be used with any cycle except RINSE/HOLD. To turn off option, select HI-TEMP RINSE OFF. 5 Operating Instructions (continued) Heat Dry Option HEAT DRY ON option provides faster drying since the heating element is on during the drying portion of cycle. HEAT DRY OFF option saves electricity since the heating element is off during the drying portion of cycle. To speed drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack. With either option, you may see water vapor coming from vent during the washing and/or drying portion of cycle. On some models, the vent is closed during washing to hold moisture and sound inside and then opens for drying. The drying option may be changed at any time during the cycle and affects only the drying period. Status Indicator Lights (available select models) When DELAY START option is selected, the Delay Start light will glow as timer counts down to begin cycle. The HEATING DELAY light means the cycle is being extended to heat water to proper temperature in the main wash or final rinse, based on options select...

Download now

Please, enter two numbers from picture: