NOTE: To charge the batteries, the player must be turned off. The RioVolt will play CDs when plugged into the AC Adapter, but it can not charge the batteries while playing CDs. After the rechargeable batteries have been charged the first time, subsequent charges should only take approximately three to four hours to reach 100% capacity. Connect Headphones Connect the supplied headphones to the MULTIFUNCTION PORT on the side of the player. If you are using the remote control, plug the headphones i

— Create playlists of your favorite songs. 1. Press and hold the Prog. Button when CD is not in play. 2. Press the »|, \4i or + 10 buttons to locate the tracks you want in your playlist. 3. Press the Prog. Button to select each track. 4. Repeat Steps 2 and 3 until you have finished selecting tracks. 5. Press Play/Pause to begin playing the playlist of tracks. 6. Press Stopflto stop playing the playlist and to clear it from memory. + 10 — Skip 10 tracks ahead. Mode 1 Repeat Current Song

dir Plays all tracks in the current directory/playlist in the order they are on the CD or playlist, then stops. For detailed instructions and descriptions please see the User's Guide located at /support Tracks Navigation Mode Press the TRACKS/MENU button to put the RioVolt in tracks navigation mode. Use the directional navigation controls to navigate within directories, and to select tracks to play. For example: 1. Press the TRACKS/MENU button. The LCD shows directories and tracks. 2. Press

2.) Insert the smaller end of the cord into the AC socket on the side of the cabinet. 3.) Insert the plug into any convenient 120V 60Hz AC outlet. Note: In order to operate this unit on batteries the AC cord must be disconnected from the unit. CAUTION This system is designed to operate on 120V 60Hz AC house current . Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty. You will note that this system is equipped with a polarize

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus. 15.) Do not overload wall outlet. Use only power source as indicated. 16.) Use replacement parts as specified by the manufacturer. 17.) The product may be mounted to a wall only if recommended by the manufacturer. 18.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 1 PD6920_C01070

POWER 1 CD RADIO BAND POWER2 21 3.) Tune in to a station. Manual Tuning: SKIP SEARCH Press the or buttons as many times as required until the frequency of the desired station appears on the display. TUNING Automatic Tuning: Hold the or buttons for approximately 2 seconds. The Tuner will begin scanning up or down automatically and will lock onto the next strong signal. 7 PD6900_ib_053102.p65 7 31/5/2002, 17:24 FOR BETTER RECEPTION AMFM Rotate the unit for best reception. Extend the telescopic ant

The procedure for storing stations in memory is as follows: 1.) Follow step 3 under “LISTENING TO THE RADIO” in page 10 to select the first station you wish to memorize. Example FM 103.50 MHz. 2.) When the desired station appears on the display press the PROG/MEMORY button inside the cassette key cover. The Preset # “01” indicator flashes and the “MEMORY” indicator appears in the display. MHz MHz 3.) Press the PRESET << / >> buttons inside the cassette key cover to select a preset channel number

You should have your outdated outlet changed bya qualified, licensed electrician. Do notfile the wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock. Battery Operation 1 .) Remove the battery compartment door on the bottom of the cabinet by pressing on the " oPEN v " tabs in the direction of the arrows, and lift the door up. ,:\ t I),: '' +'/ 2.) lnsert B pcs "G" size batteries into the battery co