Votes - , Average rating:
(
)
)
Manafacture: Sony
File size: 3.32 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
Locating Ports on the Port Replicator A DC IN indicator Illuminates while the port replicator is powered. B DC IN port (page 18) C USB ports*1 (page 128) D DVI-D port (page 118) E MONITOR port (page 118) F Network (LAN) ports*2 (page 65) G Security slot *1 Compliant with the USB 2.0 standard. *2 The port replicator has a protective sticker covering each network (LAN) port. Connect a 10BASE-T, 100BASE-TX, 1000BASE-T cable to the network (LAN) port. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the network (LAN) port. ! Simultaneous use of the following ports is not possible. -HDMI output port on your computer -DVI-D port on the port replicator -MONITOR port on the port replicator Using Peripheral Devices > Connecting a Port Replicator n107 N Attaching Your Computer to the Port Replicator ! Be sure to install the battery pack before attaching your computer to the port replicator. To attach your computer to the port replicator ! Be sure to use the AC adapter supplied with the port replicator. To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator. Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units. The monitor port on your computer is not accessible when the computer is attached to the port replicator. Use the DVI-D or MONITOR port on the port replicator for connecting an external display. 1 Disconnect all peripherals and the AC adapter from the computer. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator (4). Using Peripheral Devices > Connecting a Port Replicator n108 N ! Be sure to plug the AC adapter cable as illustrated below: Using Peripheral Devices > Connecting a Port Replicator n109 N Remove the port replicator connector cover from the bottom of the computer. ! You may find it difficult to remove the port replicator connector cover, as it is tight in place on your computer. Do not exert extra pressure when removing the cover so as not to damage the computer or the port replicator connector cover. . Once you have removed the port replicator connector cover, keep it in the designated space (5) on the port replicator. Using Peripheral Devices > Connecting a Port Replicator n110 N Align the rear bottom corners of the computer with the guides on the port replicator. Using Peripheral Devices > Connecting a Port Replicator n111 N Gently push down the computer until it clicks into place. Lift open the LCD screen lid and turn on the computer. Using Peripheral Devices > Connecting a Port Replicator n112 N Disconnecting Your Computer from the Port Replicator ! To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator. When the battery pack is running out of power, disconnecting your computer from the port replicator may result in loss of unsaved data. To disconnect your computer from the port replicator 1 Lift the computer away from the port replicator. Using Peripheral Devices > Connecting a Port Replicator n113 N Replace the port replicator connector cover on the bottom of the computer. . It is extremely important that you replace the port replicator connector cover after disconnecting your computer from the port replicator. If the connector is left uncovered, dust may get inside and damage the computer. To disconnect the port replicator completely from an AC power source, unplug the AC adapter. Using Peripheral Devices > Connecting an Optical Disc Drive n114 N Connecting an Optical Disc Drive If your computer is not equipped with a built-in optical disc drive, connect an external optical disc drive (not supplied) for disc operations. Connecting an Optical Disc Drive ! Be sure to connect an external optical disc drive to your computer before launching any preinstalled disc operation program. Be sure to connect an external optical disc drive to an AC power source before using the drive. Your computer only supports optical disc drives that run on the power directly supplied from an AC power source. To connect an optical disc drive 1 Connect your external optical disc drive to an AC outlet (1). 2 Choose the USB port (2) you prefer to use. 3 Plug one end of a USB cable (3) into the USB port, and the other end to the optical disc drive. Using Peripheral Devices > Connecting an Optical Disc Drive n115 N . See the manual that came with your external optical disc drive for detailed instructions on connecting the USB cable to the drive. Disconnecting the drive while the computer is in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction. Using Peripheral Devices > Connecting External Speakers or Headphones n116 N Connecting External Speakers or Headphones Y...
Other models in this manual:Notebooks and Netbooks - VPCZ13A7E (3.32 mb)
Notebooks and Netbooks - VPCZ13B7E (3.32 mb)
Notebooks and Netbooks - VPCZ13C5E (3.32 mb)
Notebooks and Netbooks - VPCZ13C7E (3.32 mb)