Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 6   File size: 488 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

203721A Revision - (01/21/2008) EXPLODED VIEW 4 Copyright © 2008 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC. 2 BRIGGSandSTRATTON.COM PARTS LIST Item Part # Description 1 199175GS DECAL, Hot Surface 2 * SCREW, M8 x 45 3 200699GS CONVEYOR, Air 4 * PPHMS, 5 x 12 5 201389GS PLATE, Filter 6 200697GS

downloaded: 5   File size: 595 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

. . . . . . . . . . . . . . . 28.42 cu. in. (465.7 cc) Note: For practical operation, the horsepower loading should not exceed 85% of rated horsepower. Engine power will decrease 3-1/2% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F (5.6° C) above 77° F (25° C). Engine will operate satisfactorily at an angle up to 15°. TUNE-UP SPECIFICATIONS Armature air gap . . . 0.010 – 0.014 in. (0.25 – 0.36 mm) Spark plug gap . . . . . . . . . . . . . . . . . . 0.030 in. (0.76 mm) Val

downloaded: 12   File size: 595 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

. One (1) year in India. NO WARRANTY REGISTRATION CARD IS NECESSARY TO OBTAIN WARRANTY ON BRIGGS & STRATTON ENGINES. YOU MUST SAVE THE PURCHASE RECEIPT. A PROOF OF PURCHASE DATE WILL BE REQUIRED TO OBTAIN WARRANTY. In the USA and Canada, a 24 hour hot line, 1-800-233-3723, has a menu of pre-recorded messages offering you engine maintenance information. 19 ! " # $%& ! % % ' % ! "#$%%! %%& !' (# $# (' )**+ # , - ' . #

downloaded: 5   File size: 3 mb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name@name@name

If calling for assistance, please have the model, revision, and serial number information printed on the data tag available. PROBLEM CAUSE CORRECTION Excessive tank pressure - Safety Valve pops off. Pressure switch does not shut off motor when compressor reaches “cut-out” pressure or “cut-off” setting too high. Move ON - OFF switch to OFF position. Contact trained service technician. Air losses 1. Quick connect fitting cracked or loose. 2. Check valve seat dirty or damaged. 3. Defective pressure

downloaded: 1   File size: 5 mb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name@name@name

2. Use phillips screwdriver to remove screw (F) holding air filter cover (G) on compressor housing (H). Remove air filter cover. F G H J 3. Remove air filter media (J). IMPORTANT: DO NOT operate compressor with air filter media removed. WARNING Compressed air stream from hose or tank drain can cause soft tissue damage to exposed skin and can propel objects leading to severe injury and / or property damage. • DO NOT direct air stream at self or others. • Always wear ANSI Z87.1 approved safety gla

downloaded: 7   File size: 595 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

YOU MUST SAVE THE PURCHASE RECEIPT. A PROOF OF PURCHASE DATE WILL BE REQUIRED TO OBTAIN WARRANTY. In the USA and Canada, a 24 hour hot line, 1-800-233-3723, has a menu of pre-recorded messages offering you engine maintenance information. 19 ! " # $%& ! % % ' % ! "#$%%! %%& !' (# $# (' )**+ # , - ' . # ('/ -0 !'" (# " )**1 # . , - ' ## $# # 0 %# ) 2, 344) "5 (% " # $%& 6 7 & &/ & 89

downloaded: 3   File size: 4 mb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name@name@name

Also Recommended for Use: • Safety glasses (ANSI Z87.1 approved safety glasses with side shields) • Air hose - 25 ft (7.5M), 3/8 inch diameter • Quick connector fitting - Use type I/M quick connect fittings that attach to 1/4 inch NPT thread • Hearing protection (ANSI S3.19-1974) in noisy environments • Respirator (NIOSH-approved) in dusty environments Verify Engine and Pump Oil Levels CAUTION! Any attempt to start the compressor before it has been properly serviced with the recommended oil may

downloaded: 13   File size: 297 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

If overheating occurs, stop the pump and allow it to cool before servicing it. Refill the pump casing with cool liquid. A WARNING! I Do not remove plates, covers, gauges, pipe plugs, or fittings from an overheated pump. Vapor pressure within the pump can cause parts being disengaged to be ejected with great force. Allow the pump to cool before servicing. Strainer Check If a suction strainer has been shipped with the pump or installed by the user, check the strainer regularly, and clean it a

downloaded: 7   File size: 595 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

Each one carries a stock of Genuine Briggs & Stratton Parts and is equipped with special service tools. Trained mechanics assure expert repair service on all Briggs & Stratton engines. Only dealers advertising as “Authorized Briggs & Stratton” are required to meet Briggs & Stratton standards. When you purchase equipment powered by a Briggs & Stratton engine, you are assured of highly skilled, reliable service at more than 30,000 Authorized Service Dealers worldwide, including more than 3,600 Mas

downloaded: 9   File size: 595 kb   Manafacture: Briggs & Stratton  
Category: Water and Air Pumps
@name

[2] Loosen casing clamp screw. [3] Pull casing, wire and choke lever in direction of arrow to end of travel. [4] Tighten casing clamp screw. CASING CLAMP SCREW CARBURETOR ADJUSTMENT WARNING The manufacturer of the equipment on which this engine is installed specifies top speed at which the engine will be operated. DO NOT EXCEED this speed. Differences in fuel, temperature, altitude or load may require minor carburetor adjustment. Air cleaner and its cover must be assembled to carburetor before s





Category