Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Therefore, please consult your service manual for specific procedures. CAUTION: Be sure that the fan bolts don’t protrude through the hub so far that they hit the water pump housing. Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. Verify that the radiator fan is properly balanced. Imbalanced fans can cause severe damage and/or injury and will void your warranty. WARNING Incorrect alignment or an unbalanced condition puts excessive strain on the pump's shaft and/or bearing which will result in premature failure of the shaft and/or bearing. The balance of the assembly depends primarily upon the concentricity of the fan clutch with the pump shaft. Concentricity is not assured when universal type clutches are used. The universal fan clutch has a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft. This adapter bushing is supplied with the unit. These adapter bushings add to the machine tolerances of the assembly, so special care must be taken to maintain concentricity with the shaft and the clutch fan. Edelbrock LLC * 2700 California St. * Torrance, CA 90503 Tech Line: 800-416-8628 Part #8814, 8824, 8877 & 8887 Rev. 05/11/12- QT/mc ©2012 Edelbrock LLC Brochure #63-8814...
Other models in this manual:Water and Air Pumps - 8877 (24.84 kb)