Votes - 4, Average rating: 3.5
(
)
)
|
manual abstract
It shall have a detector patch point allowing for the connection of an external equalizer in the detector loop to produce frequency selective limiting; or allows the connection of an external microphone source to produce voice-over-compression. It shall have front panel mounted switches for engaging/defeating the compressor/limiter functions. It shall have front panel switches for selecting input or output meter display. It shall have both XLR and 1/4” connectors on inputs and outputs. Performance specifications shall meet or exceed the following: Gain control shall be +/- 15dB. Threshold shall be adjustable from -40dB to +22dB. Ratio shall be adjustable from 2:1 to infinity. Attack time shall be adjustable from 200uSec to 20mSec. Release time shall be adjustable from 100mSec to 3 seconds. the output level shall be adjustable from minus infinity to +18dBu. The maximum in-out level shall be +23dBu. The input impedance shall be 20K ohm balanced bridging. The output impedance shall be 200 ohm quasi-balanced. The frequency response shall be 20Hz to 20KHz, +/-0.2dB. Distortion shall be <0.01% THD, 1KHz @0dBu, and <0.15% THD @ +15dBu from 20Hz to 20KHz. Hum and noise shall not exceed -96dBu @ unity gain. The unit shall operate at 115VAC +/-5%, 50-60Hz. The unit shall be designed for mounting in a standard EIA 19” rack (19”L x 1.75”H x 6”D) and shall have a shipping weight of 8 lbs. The unit shall either be a model CLX-51 (single channel) or a CLX-52 (dual channel) Compressor Limiter manufactured by Ashly Audio, Inc. No other unit shall be acceptable unless submitted data from and independent research lab verifies that the above size/performances specifications are met. Features: • XLR and 1/4” Connectors • Peak Compression Circuitry •Precision Balanced Inputs • Extremely Low Noise and Distortion • Calibrated Threshold Control • Detector Patch Point • Input-Output Meter Switch • Gain Reduction Meters • Stereo Tie Switch on CLX-52 • U.L. Listed • 5-Year Worry-Free Warranty General Specifications CLX-51/CLX-52 CONTROLS Gain: PC d Threshold: -40dBu - +22dBu Ratio: 2:1 - infinite Attack Time: 200uSec - 20mSec Release Time: c e S rn c e S G Output: -40dBu - +20dBu Stereo Tie Switch: Yes(CLX52) Defeat Switch: Yes DETECTOR PATCH POINT Allows side-chain connection of equalizer for frequency selective operation INPUT IMPEDANCE: 20k Ohms, balanced bridging OUTPUT IMPEDANCE: 200 Ohms quasi-balanced (terminate with >600 Ohms) FREQUENCY RESPONSE: +/-.2dB 20Hz-20kHz DISTORTION +15dBu, 1kHz: <0.01% +15dBu, 20Hz-20kHz: <0.15%, HUM AND NOISE: -96dBu, unity gain POWER REQUIREMENTS: 93VAC-120VAC, 50-60Hz, 5W SIZE: 19"W x 1.75"H x 6"D SHIPPING WEIGHT: 8lbs. Rear Panel CLX-51 Rear Panel CLX-52 Applications: Concert Sound, PA Systems, DJ Systems, Dance/Night Clubs, Churches, Auditoriums, Lecture Halls, Sports Sta...
Other models in this manual:Water and Air Pumps - CLX-51 (96.67 kb)