Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Home Stereos - CMT-SBT300W (6.24 mb)
Home Stereos - CMT-SBT300W (6.18 mb)
Home Stereos - CMT-SBT300W (6.19 mb)
Home Stereos - CMT-SBT300W (6.18 mb)
manual abstract
Keep the antennas away from the unit, power cord and other AV components to avoid picking noise. Secure the end of the FM lead antenna with adhesive tape. To prepare the AM loop antenna Rewind an antenna cord Stand the antenna and wound around the secure it to the slit until it antenna and raise the clicks. antenna stand. Connecting the iPod/iPhone/iPad or USB device Connect an iPod/iPhone/iPad or USB device to the USB port .. For connecting an iPod/iPhone/iPad* to the USB port, use a USB cable supplied with your iPod/iPhone/iPad. * For the iPod/iPhone/iPad you can use with this system, see “Compatible iPod/iPhone/iPad models” (page 22). Getting started 13GB Preparing a wireless LAN antenna Preparing a wireless LAN antenna Note on the wireless LAN signal strength indicator “ ” lights up in the display . when the system is turned on and the wireless LAN connection to the access point is established.* Check the reception status of the wireless LAN signal and install the system where the received signal is strong. The more segments there are, the stronger the signal. * is also displayed for a network (LAN) cable connection. 14GB Attaching speaker pads Attach the supplied speaker pads to the bottom of the speakers to prevent slipping. Getting started 15GB Inserting the batteries Insert two supplied R6 (size AA) batteries, . side first, matching the polarities shown below. Notes • With normal use, the batteries should last for about 6 months. • Do not mix an old battery with a new one or mix different types of batteries. • If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. 16GB Setting the clock Set the clock using the buttons on the remote. 1 Press ./. (power) . to turn on the system. 2 Press TIMER MENU . to select the clock set mode. If “PLAY SET” flashes, press ./. . repeatedly to select “CLOCK,” and then press (enter) .. 3 Press ./. . repeatedly to set the hour, then press (enter) .. 4 Use the same procedure to set the minutes. Note The clock settings are reset when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY . repeatedly to display the clock. The clock is displayed for about 8 seconds. If the system is in BLUETOOTH/Network Standby mode, the clock does not appear by pressing DISPLAY .. Getting started 17GB Operations Operations c 1 Press CD FUNCTION .. Press FUNCTION . on the unit repeatedly until “CD” appears in the display .. 2 Press the . (open/close) button . to open the disc tray .. 3 Load a disc with the label side facing up. Label side (printed side) . (open/close) . 4 Press the . (open/close) button . to close the disc tray .. 5 Press . (play/pause) button .. Playback starts. When “NO DISC” appears in the display No disc is set in the disc tray or a disc that cannot be play...
Other models in this manual:Home Stereos - CMT-SBT300WB (6.24 mb)