Votes - 4, Average rating: 4
(
)
)
|
Photos and specs Sony CMT-EP404 |
Other manuals for this model:
manual abstract
Recording starts. Tape To stop recording Press x. Tips • For recording from a CD to a tape manually, you can turn ./> clockwise or counterclockwise (or press . or > on the remote) to select tracks during recording pause mode (after step 4 and before step 6). • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side (CMT-EP505 only). • When an AM program is noisy while recording, set the ISS switch at the rear of the unit to select the position that most decreases the noise (CMT-EP404 only). 15GB Timer-recording radio programs To timer-record, you must preset the radio station (see “Presetting radio stations” on page 10) and set the clock (see “Setting the clock” on page 7) beforehand. 1 Tune in the preset radio station (see “Listening to the radio” on page 11). 2 Press CLOCK/TIMER SET on the remote repeatedly until “SET TMR” appears, then press ENTER on the remote. “ON” appears, and the hour indication flashes. 3 Set the starting time. Press CLOCK/TIMER + or – on the remote repeatedly to set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press CLOCK/TIMER + or – on the remote repeatedly to set the minute, then press ENTER on the remote. The hour indication flashes again. 4 Set the time to stop the recording following the procedure in step 3. 5 Press CLOCK/TIMER + or – on the remote repeatedly until “RECORD” appears, then press ENTER on the remote. The TIMER indicator lights up. 6 Press CLOCK/TIMER + or – on the remote repeatedly to adjust the volume* for listening to the radio when it is activated by the timer, then press ENTER on the remote. * This does not affect the recording volume; it only adjusts the volume for when the radio turns on at the preset time. 7 Insert a recordable tape with the side you want to record on facing towards you. 8 Press z. 9 Press nN, if you want to switch the direction (CMT-EP505 only). 10Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select g to record on one side, h to record on both sides (CMT-EP505 only). 11Press ?/1 to turn off the system. To Do this Check or change the Turn on the system and then setting start over from step 1 when the TIMER indicator appears. Activate the timer Press CLOCK/TIMER ON/ operation OFF on the remote until the TIMER indicator goes on. Cancel the timer Press CLOCK/TIMER ON/ operation OFF on the remote until the TIMER indicator goes off. Notes • When you use the recording timer at the same time as the Sleep Timer, the Sleep Timer setting has priority. • You cannot activate the Daily Timer and the recording timer at the same time. • Do not operate the system from the time the system turns on until the recording starts (about 30 seconds before the preset time). • If the system is on about 30 seconds before the preset time, the timer-recording will not be activated. • The volume is reduced to minimum during recording. • If the system is in the recording or recording-pause mode at the preset time, the timer recording will not be made. • If the system is playing back a tape at the preset time, the system will switch to the tuner, but the timer recording will not be made. 16GB Sound Adjustment Timer Sound Adjustment Timer Adjusting the sound Reinforcing the bass sound —MEGA BASS You can listen to music with stronger bass tones. Press MEGA BASS. “MEGA BASS” appears in the display and the bass is reinforced. Press again to cancel MEGA BASS. Selecting the preset effect from the music menu Press MUSIC MENU repeatedly to select the preset effect you desire. Each time you press the button, the display changes cyclically as follows: ROCK t POP t JAZZ t FLAT* t ROCK t ... * “FLAT” is displayed for a few seconds. Turning off the sound —Muting You can turn off the sound temporarily. Press MUTING on the remote. Press again to cancel muting. Tip You can also turn up the volume by turning VOLUME clockwise or turning off the power and turning it on again. Falling asleep to music — Sleep Timer You can set the system to turn off after certain amount of time, so that you can fall asleep to music. Press SLEEP on the remote. Every time you press the button, the minute display (the turn-off time) changes as follows: 90 t 80 t 70 t … t 10 t OFF t 90 t … While the Sleep Timer is on, “TIMER” flashes in the display. To Press Check the SLEEP on the remote once. remaining time Change the SLEEP on the remote repeatedly time to turn off to select the time you want. Cancel the Sleep SLEEP on the remote repeatedly Timer function until “SLEEP OFF” appears. Sound Adjustment/Timer 17GB Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock”on page 7). 1 Prepare the sound source you want to play. • CD: Place a CD. • Tape: Insert a tape with the side you want to play on facing towards you. • Radio: Tune in the preset station you want (see “Listening to the radio...
Other models in this manual:Home Stereos - CMT-EP505 (191.23 kb)