Votes - 4, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
1/u (Power) VOLUME 1,34 p0/ ) aPJog dialPLAY MODE 2 CD · P AMS =/+ D.SKIP VOL +/– 1 Press PUSH OPEN and place a CD on the disc tray. If the disc is not placed properly, it will not be recognized. With the label side up. When you play a CD single, place it on the inner circle of the tray. 2 Press DISC SKIP (or D.SKIP on the remote) to place up to four more CDs on the tray. The disc tray rotates so you can insert other CDs. 3 Close the front cover. 4 Press one of the DISC 1 - DISC 5 buttons. Playback starts. If you press aP(or CD aon the remote), playback starts from the CD in the playing position. Disc number in the playing position Track number Elapsed time continued Basic Operations Playing a CD (continued) To Do this Stop playback Press p. Pause Press aP(or Pon the remote). Press aPagain to resume playback (or CD aon the remote). Select a track During playback or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go backward) and release it when you reach the desired track. Or press AMS* +(to go forward) or AMS =(to go backward) on the remote. Find a point Press and hold )or 0during in a track playback, and release at the desired point. Select a CD Press one of the DISC 1 - DISC 5 buttons (or DISC SKIP). Play only the Press PLAY MODE repeatedly CD you have until “1 DISC” appears. selected Play all CDs Press PLAY MODE repeatedly until “ALL DISCS” appears. Remove or Press PUSH OPEN. change the CDs Adjust the Turn VOLUME (or press volume VOL +/– on the remote). * AMS: Automatic Music Sensor Tips • Pressing aPwhile the system power is off automatically turns on the system and starts CD playback if there is a CD on the tray (One Touch Play). One Touch Play is not available in Power Saving mode. • You can switch from another source and begin playing a CD just by pressing aP, one of the DISC 1 - DISC 5 buttons, or CD aon the remote (Automatic Source Selection). • If there is no CD in the player, “NO DISC” appears in the display. • You can change the CD which is in the loading position during playback of the CD which is in the playing position. Recording a CD — CD Synchro Recording This function lets you easily record from a CD to a tape. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 1/u (Power) DSP 71 »p DOLBY NR p 6 2,35 4 1 Press PUSH 6and insert a blank tape into deck B. With the side you want to record on facing forward 2 Press PUSH OPEN and place a CD. With the label side up. When you play a CD single, place it on the inner circle of the tray. 3 Close the front cover. 4 Press DISC SKIP repeatedly until the disc number you want to record appears in the playing position indicator. 5 Press CD SYNC. Deck B stands by for recording, the CD player stands by for playback, and the indicator on the abutton (for the front side) lights up green. 6 Press DIRECTION repeatedly until Aappears to record on one side or §(or RELAY) to record on both sides. 7 Press P. Recording starts. To stop recording Press pon deck B or on the CD player. Tips • When you want to record on the reverse side, press »after pressing CD SYNC in step 5 so the indicator on the »button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level, high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display. • To record with the surround effect, press DSP so “SUR ” appears in the display. The equalizer settings will not be recorded. Note You cannot listen to other sources while recording. Listening to the radio — Preset Tuning Before using this function, preset radio stations in the tuner’s memory (see “Step 4: Presetting radio stations” on page 10). STEREO/MONO Basic Operations 12 3VOLUME 1/u(Power) PRESET +/– VOL +/– continued Listening to the radio (continued) 1 Press TUNER/BAND repeatedly until the desired band appears in the display. Each time you press this button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nAMnUKV* To listen to non-preset radio stations Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press TUNING +/– to tune in the desired station. Tips • Pressing TUNER/BAND while the system power is off automatically turns on the system and tunes in the last received station (One Touch Play). One Touch Play is not available in Power Saving mode. • You can switch from another source to the radio by pressing TUNER/BAND (Automatic Source n * When you select this band, “STEREO Selection). • If an FM program is noisy, press STEREO/ MONO so “MONO” appears in the display. There PLUS” appears in the display. will be no stereo effect, but the reception will improve. Press this button again to restore the 2 Press TUNING MODE repeatedly until “PRESET” appears in the stereo effect. • To improve broadcast reception, move...
Other models in this manual:Home Stereos - LBT-DR8AV (861.85 kb)
Home Stereos - LBT-W700AV (861.85 kb)
Home Stereos - LBT-W900AV (861.85 kb)