Votes - 1, Average rating: 5 ( )

Manafacture: Sony File size: 353.7 kb File name: Language of manual:

4 Set the timer to the hour you want the music to start by pressing TUNING/TIME SET + or –, then DISPLAY•ENTER MEMORY. Set the minutes, then press DISPLAY•ENTER MEMORY. 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) The Timer Tip You can have the player go on the next day at the same time. Just press STANDBY until the t indication appears in the display. The preset settings remain until you reset them. Note The timer mode is canceled: – when you press ( button of the tape player while music plays in the timer mode. – when you select “TAPE” using FUNCTION. 6 Press TUNING/TIME SET + or – to set the volume, then DISPLAY•ENTER MEMORY. 7 Press STANDBY. The t indication lights up and the power goes off. At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter the standby mode. To check/change when the playback will start Press WAKE UP, then DISPLAY•ENTER MEMORY. Each time you press DISPLAY•ENTER MEMORY, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and reenter it. To use the player before a timer playback starts Just turn on the player, and then you can use it. If you turn off the player before the preset time, timer playback will start at the preset time. In case of the radio, however, if you listen to the station which is different from the one you tuned in step 1 on page 20, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player. To stop play Press POWER. The Timer The Timer Falling asleep to SLEEP music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. Tips • When you are playing radio or CD, make sure that ( of the tape player is not depressed. • You can fall asleep and wake up to different music. Set the waking up timer first (see page 20), turn on the power, and then set the sleeping timer. However, you cannot store different radio stations. Note When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end. 1 Play the music source you want. 2 Press SLEEP to display “SLEEP.” 3 Press SLEEP to select the minutes. Each time you press the button, the indication changes as follows: “60” n “90” n “120” n no indication n “10” n “20” n “30.” To cancel the sleep function Press POWER to turn off the power. The Timer Setting Up Hooking up the AM loop aerial 2 AM aerial terminal system Make sure you turn off the power before making any connections. Right speaker 1 Speaker terminals Speaker cord Left speaker FM aerial 3 To a wall outlet Setting Note Connect the supplied speakers to this player. If you connect any other speakers or equipment, a malfunction may occur. 1 Hooking up the speakers 1 Twist the speaker cable coating and strip it from the end of the cable. 2 Connect the black wire to (–) minus and the red wires to (+) plus terminals: the right speaker wires to the R and the left speaker wires to the L terminals. SPEAKER IMP USE 3 continued Setting Up Hooking up the system (continued) 2 Hooking up the aerials FM aerial** AM loop aerial (supplied)* AM FM *Reorient the aerial to improve broadcast reception. **Keep the aerial as horizontal as possible. Setting up the AM loop aerial 3 Connecting the AC power cord Connect the AC power cord to the wall outlet. 4 Inserting batteries into the remote Insert two size AA (R6) batteries (not supplied) Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. Setting Up Selecting the SOUND MEGA BASS audio emphasis (Sound Mode/MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. Setting Selecting the sound characteristic Press SOUND to select the audio emphasis you want. Choose To get ROCK powerful, clean sounds, emphasizing low and high range audio VOCAL the presence of vocals, stressing middle range audio LIVE percussive sounds, emphasizing bass audio POP light, bright sounds emphasizing high and middle range audio OFF the whole dynamic range for music such as classical music Reinforcing the bass sound Press MEGA BASS. ”MEGA BASS” appears in the display. To return to normal sound, press the button again. Setting Up Additional Information Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. On power sources • The player is not disconnected from the AC power source (mains) as long as it is connected...

Download now

Please, enter two numbers from picture: