Votes - 2, Average rating: 4
(
)
)
|
manual abstract
• You can switch from another source to the tape deck just by pressing aor »(Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so “DOLBY NR B” appears in the display. 2 Press DIRECTION repeatedly to select Ato play one side, §* to play both sides, or RELAY (Relay Play)** to play both decks in succession. 3 Press a. Press »to play the reverse side. The tape starts playing. * The deck stops automatically after playing both sides five times. ** Relay Play always plays according to the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Pause (Deck B only) Press P. Press again to resume play. Fast-forward Press )while playing the front side or 0while playing the reverse side. Rewind Press 0while playing the front side or )while playing the reverse side. Remove the cassette Press 6EJECT. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. POWER p 31 412 1 Press 6EJECT and insert a recorded tape in deck A and a blank tape in deck B. With the side you want to play/record on facing forward 4 Press P. Dubbing starts. When dubbing ends, decks A and B automatically stop. To stop dubbing Press pon deck A or B. Tips • When you dub on both sides, start recording from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • If you set DIRECTION to §when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. Note You cannot record the surround effect. Basic Operations »» 6Pr0) 6 »» p0)p 2 Press H SPEED DUB. Deck B stands by for recording. 3 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 17 The CD Player Using the CD display Playing CD tracks repeatedly You can check the remaining time of the — Repeat Playcurrent track or the whole CD. DISPLAY/DEMO /Press DISPLAY/DEMO during playback. Each time you press this button in Normal Play, the display changes as follows: nElapsed time on the current track This function lets you repeat a single CD or all CDs in Normal Play, Shuffle Play, and Programme Play. 1/ALL DISCS REPEAT /Press REPEAT repeatedly during playback until “REPEAT” appears in the display. n Repeat Play starts. The following table Remaining time on the current track describes the various repeat modes. n Remaining time on the current CD (1 DISC To repeat Press mode) or “PLAY” (ALL DISCS mode) All the tracks on 1/ALL DISCS repeatedly n Clock display (for a few seconds) the current CD until “1 DISC” appears in the display. n Effect (P FILE) name or “EFFECT ON All the tracks on 1/ALL DISCS repeatedly all CDs until “ALL DISCS” appears (OFF)” To check the total playing time and the number of tracks on a CD Press DISPLAY/DEMO in stop mode. If you press DISPLAY/DEMO again, the clock display appears for a few seconds then the display returns to the previous indication. in the display. Only one track* REPEAT repeatedly while playing the track you want to repeat until “REPEAT 1” appears in the display. * You can’t repeat a single track during Shuffle Play and Programme Play. To cancel Repeat Play Press REPEAT repeatedly until “REPEAT” or “REPEAT 1” disappears from the display. Playing CD tracks in random order — Shuffle Play You can play all the tracks on one CD or all the CDs in random order. 1 DIRECT PLAY Jog dial 43 2 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Press PLAY MODE repeatedly until “SHUFFLE” appears in the display. 3 Press 1/ALL DISCS to choose “1 DISC” or “ALL DISCS.” “All DISCS” shuffles the tracks on all the CDs in the player. “1 DISC” shuffles the tracks on the CD in the playing position. 4 Press a. “J” appears and all the tracks play in random order. To cancel Shuffle Play Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears from the display. The tracks continue playing in their original order. To select a desired CD Press one of the DIRECT PLAY buttons during 1 Disc Shuffle Play. Tips • You can start Shuffle Play during Normal Play by pressing PLAY MODE repeatedly until “SHUFFLE” appears in the display. • To skip a track, turn the jog dial clockwise (or press AMS +on the remote). Programming CD tracks –– Programme Play You can create a programme of up to 32 tracks from all the CDs in the order you want them to be played. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press DISC SKIP to select a CD. 2 5 Turn the jog dial until the desired track appears in the displ...
Other models in this manual:Home Stereos - LBT-XB3 (672.39 kb)
Home Stereos - LBT-XB6 (672.39 kb)