.. 34 1.2 Caracteristiques... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ... .. ...... ..... .. 34 1.3 Deballage.. ...... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ..... . ..... ...... ..... .. 35 2. Installation ...... ..... ...... ...... ..... ...... ..... ...... ..... ...... ...... ..... ...... ...... ..... ...... ..... ...... ..... ...... ...

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

After a few seconds, the monitor will be in the best visual display mode. Color adjustment ( ) : when the function is selected, the monitor will come into the sub- menu, there are five functions that can be selected: 9300k, 7800k, 6500k, USER,W-B. Selecting USER you will enter user mode and you can make adjustment to R/G/ B obtain your satisfying color. Selecting W-B the monitor will adjust the white-black color reference voltage optimal color balance. A05-1XAX-C0X_ ENGLISH R/ G/ B adjustment (

VESA/70 1024.768 56.5 70 Non-interlaced 9. VESA/75 1024.768 60.0 75 Non-interlaced 10. VESA/60 1280.1024 64.0 60 Non-interlaced 11. VESA/75 1280.1024 80.0 75 Non-interlaced 7 Signal Connector Pin-outs To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector. A05-17AM-D01 - A05-17BM-D03 - A05-19BM-D02_X02 9 - 40 ENGLISH 7.1 15-pin Mini D-type Male VGA Connector 1 Red Video 6 Red Ground 11 Ground 2 Green Video 7 Green Ground 12 Serial Data/I/O 3 Blue Video

Ko#mon 9 ■■■■■=] 8 1310 <38 © /"! & A *- Q fcâ (B ÜP -* fnwvlli 9 8 H 4hV.«4.0 № Here are some items which can be adjusted as below, please press " J " to enter the item menu. • Clock: Press the "V" or "A" button to adjust the width of the screen. • Phase: Press the "V" or "A" button to reduce the noise on the screen. • Image Position a.H - Position: Press the "V" or "A" button to reposition the Image to the right or left. b.V - Position: Press the"V" button to move the Im

5. If you want to exit the OSD image, select the “exit function/EXIT OSD”, or leave the monitor alone for 20 seconds (Windows default), the OSD window will close and sure automatically. 6. When the OSD window is active, it shows the input signal timing. 3.3 Adjusting the picture 1. BRIGHTNESS 1.1 Auto gain control: Adjust the gain automatically. 1.2 Brightness: Adjust the brightness automatically. 1.3 Contrast: Adjust the contrast automatically. 1.4 Exit 2. COLOR (In the state of DVI without thi

The great performance in brightness and contrast ratio make it suitable for every kind of use. Two speakers provided for a good audio quality. Functionality and ease of use for a good quality/price ratio. ISO 9001:2000 Certified Company .where solutions begin I-See S152 15” LCD Monitor TECHNICAL FEATURES: Panel Dimension 15” Type TFT Viewable area 304.128 x 228.096 (mm) Pixel Pitch 0,297 mm Colours supported 16.7M Maximum resolution 1024 x 768 @ 75 Hz Brightness 250 cd/m2 Con

........... 22 3.3.2 Tasti +/- ................................................................................................................ .............. 22 3.3.3 Tasto Enter.............................................................................................................. ........... 22 3.3.4 Menu OSD ................................................................................................................. ........ 23 3.3.5 Tabella delle funzioni .........................

then connect the AC adapter output to the power input of the monitor. 3. Audio cable connection: Insert one end of the audio cable to the audio output of the PC audio card and the another to the audio input of LCD monitor. 4. Power on: turn on both of the monitor and computer. After the monitor is power on, the LED lights up green or blue, If the LED become red and flashing, please check the video signal cable. If LED is off, please press power on switch. A05- 1XAX- C0X_ MX02 ENGLISH 2.3Selftest