The rear observation camera image turns off automatically any time the gear selector is moved out of the reverse position. B. If you want to view the rear observation camera image at any other time, press and hold switch button 2 on the rearview mirror. The image will remain on as long as switch button 2 is held on. Releasing the switch button #2 will turn off the image. C. The mirror/monitor can be used as regular glass rearview mirror. III. How to play an external audio or video signal 1. You

Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly the 0-9 buttons 2. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. TURNING THE VOH802 DL ON AND OFF 1 Sliding the screen release lock forward viewing will unlock the screen and it will drop down slightly. (Pivot the screen downward until a comforta

Once the desired adjustment bar is displayed, use the -/+ buttons to adjust the selected function. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. 37. (-) Button* Use this button to decrease the level of the selected picture adjustment. 38. (+) Button* Use this button to increase the level of the selected picture adjustment. 39. NUMBER Buttons*** Allows the user to enter numbers 0 to 9 for direct access to TV channels. 40. I

.. Placez le moniteur et le recepteur plus loin l’un de l’autre. .. Connectez le moniteur a une prise differente de celle a laquelle le recepteur est connecte. .. Consultez votre revendeur local ou un technicien qualifie. Avertissement de la FCC: Pour assurez une conformite continue au reglements de la FCC, l’utilisateur doit utiliser un cordon d’alimentation mis a terre et le cable d’interface video protege avec noyaux en ferrite, fourni avec l’appareil. Chaque modification ou changement non-au

The desired function will be highlighted in red. “+” And “-“ buttons are used to adjust the desired function. Note: If a button has not been pressed for 5 seconds, then the OSD menu is automatically hidden again. -5 Invoking OSD menu Briefly press the menu button on top of the monitor. The OSD menu “ Navigation settings” is displayed and Volume will be highlighted in Red. In the OSD menu you can adjust the following settings: * Volume: Adjust Volume level of the built-in monitor loudspeaker * Br

3) Generally, the best location for the video monitor is where the vehicle's factory dome light is installed. The monitor should be located in such a manner that it can be comfortably viewed by rear seat passengers. NEVER INSTALL THE MONITOR IN A PLACE WITHIN THE DRIVER'S VIEW. THIS IS NOT ONLY DANGEROUS, BUT IT IS ALSO ILLEGAL IN MANY STATES. 4) Once the mounting location of the monitor has been determined, there may be additional preparation work necessary, depending on the vehicle structure a

Warnings • Do not use any solvents or cleaning materials when cleaning the video Monitor. • Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. • Before putting on headphones always adjust the volume setting to the lowest position. • Do not put pressure on the screen. • Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Table of Contents A.Introduction...........

Demo: Screen divided into two for demonstration purposes. 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can also be adjusted. "Picture Boost" is located in the fifth icon labeled " Picture Boost" in the OSD menu. Turn on " Bright Frame" to select a zone on the screen to be enhanced. Please note when adjust or turn on any one of the DCB features, the rest of color settings including DCR will be di

Verify that the source is on and playing a known good media (such as a videotape). Verify connections at both ends of the source component harness. -Push and hold the volume up button until sound is heard over headphones. If problem is limited to the dash radio, verify radio is tuned to the correct channel, and that power to the wired RF modulator is on. (Refer to instructions with modulator kit). Otherwise, verify all connections per the wiring diagram on page 6. -Press Auto Program button. The

ency: Horizontal:30K - 70KHz Pixel Frequency: 110MHz Maximum Resolution: 1280 x 1024 @ 60Hz Factory pre-set Mode: 6 User Programmable Mode: 10 Power Source: Universal 100 ~240 VAC,50/60Hz Power Consumption: 120W (Max) EPA Energy Star®: Yes Video Signal Connectors: 15 pin mini D-sub Male User Controls Front Panel: Power,UPDown, Function Key Digital Control Function: Brightness, Contrast, H-size, H-center,V-size, V-center, Pinchusion,Trapezoid, Rotation, Degauss, Recall Speaker Base: 7E