Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI 1/HDMI 2/MHL). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. AUTO Press the [ ] button to automatically adjust the screen settings. Changing the resolution in Display Properties will activate the Auto Adjustment function. AUTO Turn the screen on or off. (Power lamp) The power indicator will be lit when the product is operating normally. To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time. Key Guide When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.) To access the onscreen menu when the guide is displayed, press the corresponding button again. The Key Guide may vary depending on the function or product model. Refer to the actual product. 211 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 14V HDMI 2 / MHL HDMI1 RGB IN Port Ports Connect to the DC power adapter. HDMI 1 Connect to a source device using an HDMI cable. HDMI 2 / MHL Connect to a source device that has the MHL function using the MHL cable. Connect to a source device using an HDMI cable. Connect to a PC using the D-SUB cable. Connect to an audio-input source using an audio cable. Connect to an audio output device such as headphones. 221 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into Check if the Stand Connector is the Stand in the direction shown firmly connected. by the figure. RELEASE LOCK Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. -Caution Do not hold the product upside down only by the stand. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 231 Preparations 1 1 Preparations 1.3.2 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (±2°) ~ 20° (±2°) • You can adjust the tilt of your monitor. • Hold the lower part of the product and adjust the tilt carefully. 241 Preparations 25 1 Preparations 1 Preparations 1.3.3 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it. Installing a Wall-mount Kit or Desktop Stand Attach the wall-mount kit or desktop stand here Bracket (sold separately) 1 A 2 3 B 4 A B 1 Preparations Notes • Using a screw longer than the standard length can damage the internal components of the product. • The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. • Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. • Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. • To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm or farther away from the wall. • Be sure to use a wall-mount kit that complies with the standards. 1.3.4 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your...
Other models in this manual:Displays - MAGIC S27B550V (7.83 mb)
Displays - S23B550V (7.83 mb)
Displays - S27B550V (7.83 mb)