|
Other manuals for this model:
manual abstract
..This may cause an explosion or fire. Do not try to move the monitor by pulling on the wire or the signal cable. ..This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. ..This may cause a breakdown, electric shock or a fire due to damage to the cable. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Other Keep the monitor away from any magnetic substances. • This may cause discoloring or distortion of the image. Unpacking Monitor and Stand Power Cord (Some models include a stand attached. ) Please make sure the following items are includedwith your monitor. If any items are missing, contact your dealer. Stand Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Driver Installation CD For Multimedia model Multimedia Speaker Stand Sound Cables(2each) DC Power Cord (Option) User Guide Front 1. Menu button Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. 2. Adjust buttons These buttons allow you to highlight and adjust items in the menu. 3. Enter button Used to select the OSD menu. 4. Power button Use this button to turn the monitor on and off. 5. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear SyncMaster 591S/793S/793DF/795DF General /797DF/997DF/793MB/795MB (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal Cable Connect the signal cable to the video port on your computer, video board, video card, or graphics card. BNC Connectors (Option) SyncMaster 997DF (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin D-sub connector on the back of your monitor. 3. BNC Connectors Connect the signal cable to the BNC signal port on the back of your (Option) monitor. Note: See Connecting Your Monitor for further information regarding cable connections. Bottom 1. Signal Cable Connect the signal cable to the video port on your computer, video board, video card, or graphics card. 2. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 3. Tilt/Swivel Base You can separate the base from the monitor. Connecting Your Monitor SyncMaster 591S/793S/793DF/795DF General /797DF/997DF/793MB/795MB 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the video port on your computer, video board, video card, or graphics card. 3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter. 4. Turn on your computer and monitor. If your monitor displays an image, installation is complete. BNC Connectors (Option) SyncMaster 997DF 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the end of the signal cable to your computer's video port(video board, video card or graphics card). 3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the Connecting Your Monitor pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter. 4. When you use a BNC connector. Connect the signal cable to the BNC signal port on the back of your monitor/computer. 5. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Opstilling-For multimedia-model 1. Sluk for computeren og fjern stromkablet. 2. Tilslut signalkablet til din computers videoport (videoboard, videokort eller grafikkort). 3. Tilslut den ene ende af et lydkabel til stereo output jacket pa lydkort eller computer. Tilslut den anden ende af kablet til stereo input jacket bag pa monitorens fod. Tilslut den ene ende af det andet lydkabel til linie output jacket pa lydkort eller computer. Ti...
Other models in this manual:Displays - 591S (2.54 mb)
Displays - 591V (2.54 mb)
Displays - 59E (2.54 mb)
Displays - 783DF (2.54 mb)