Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. Note Design and specifications are subject to change without prior notice. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) Specifications PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. Power off (Power button) State Normal Operation Power saving mode EPA/ENERGY 2000 Power Indicator Blue Blue blinking Off Power Consumption 45 watts Analog/Digital:1.5 watt USB:2.5watt 0.5 watts Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/MAC, 832 x 624 49.726 74.551 57.284 -/MAC, 1152 X 870 68.681 75.062 100.000 -/VESA, 640 X 480 31.469 59.940 25.175 -/VESA, 640 X 480 37.861 72.809 31.500 -/VESA, 640 X 480 37.500 75.500 31.500 -/VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/VESA, 1024 x 768 56.476 70.069 75.000 -/VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 960 60.000 60.000 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1680 x 1050 64.674 59.883 119.000 +/Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz Specifications General General Model Name SyncMaster 2243QWX LCD Panel Size 22 inch (55cm) Display area 473.76 mm (H) X 296.1 mm (V) Pixel Pitch 0.282 mm (H) X 0.282 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7M Resolution Optimum resolution 1680 X 1050@60Hz Maximum resolution 1680 X 1050@60Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Inter face), USB 0.7 Vp-p ± 5 % Separate H/V sync, Composite TTL level (V high . 2.0 V, V low . 0.8 V) Maximum Pixel Clock 146MHz(Analog,Digital,USB) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin-to-15pin D-sub cable,Detachable DVI-D to DVI-D connector, Detachable USB Cable, Detachable Dimensions (W x H x D) / Weight (HAS Stand) 505.5 x 331.5 x 67.6 mm(19.9 x 13.1 x 2.7inch)(Without Stand) 505.5 x 375.4 x 200.0 mm(19.9 x 14.8 x 7.9inch)(With Stand)/6.35kg(14.0Ibs) VESA Mounting Interface 100.0 mm x 100.0 mm Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Storage Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with p...
Other models in this manual:Displays - 2043BW (2.76 mb)
Displays - 2043SN (2.76 mb)
Displays - 2043SNX (2.76 mb)
Displays - 2043SNXPLUS (2.76 mb)