Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
• This function is not available for products with an Analog interface only. Enter button [ ] Activates a highlighted menu item. AUTO button Use this button for auto adjustment. (Available in Analog mode only) Power button [ ] Use this button for turning the product on and off. Power Indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Volume button[ ] When OSD is not on the screen, push the button to adjust volume. Note Applicable to the models that have speakers only. Headphone sound output terminal[ ] Note Applicable to the models that have speakers only. Speaker You can hear sound by connecting the soundcard of your PC to the monitor. 12 Introduction Note Applicable to the models that have speakers only. Rear Note The configuration at the back of the monitor may vary from product to product. POWER port POWER port Connect the power cord for your monitor to the POWER port on the back of the product. DVI IN Connect the DVI Cable to the DVI IN port on the back of your monitor. Note Applicable to the digital (DVI)-dedicated models RGB IN RGB IN Connect the D-sub cable to the 15-pin, RGB IN port on the back of your monitor. DVI IN only. USB connection terminal (Option) 13 Introduction UP port of the monitor and the DOWN port of the USB monitor Note Applicable to the models that have USB ports only. AUDIO IN port AUDIO IN port Connect the audio cable for your monitor to the audio port on the back of your computer. Note Applicable to the models that have speakers only. UP(USB upstream port) Connect the USB port of the computer with the USB cable. DOWN(USB downstream port) Connect the and a USB device with the USB cable. Kensington Lock Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Note The location of the Kensington Lock may be different depending on its model. Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction . 2. Connect the Kensington Lock cable. 3. Fix the Kensington Lock to a desk or a heavy stationary object. Note See Connecting Cables for further information regarding cable connections. 14 Introduction Cable holding ring • Fix the cables using the holding ring, as shown in the figure. 15 Connections Connecting Cables Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the DVI IN Port on the back of your Monitor. 16 Connections Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Note • If the monitor and the computer are connected, you can turn them on and use them. • The DVI IN terminal is supplied for the digital (DVI)-dedicated models only. Connecting USB Note Applicable to the stand models that have USB ports only. Note You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to the DOWN port of the monitor without connecting them to the PC. The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps Power Consumption 2.5 W 2.5 W 2.5 W (Max., each port) (Max., each port) (Max., each port) 17 Connections 1. Connect the UP port of the monitor and the USB port of the computer with the USB cable. Note To use DOWN port, you have to connect the UP (Upstream Cable) to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port. 2. Connect the DOWN port of the USB monitor and a USB device with the USB cable. 3. The use procedures are as the same as those for using an external device connecting to the PC. • You can connect and use a keyboard and mouse. • You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.) • You can run, move, copy or delete the files on the storage device. (Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3 player, etc.) • You can use other USB devices that can be connected to a computer. Note When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) The company is not liable for problems or damages to an external device cause...
Other models in this manual:Displays - 2043BW (2.76 mb)
Displays - 2043SN (2.76 mb)
Displays - 2043SNX (2.76 mb)
Displays - 2043SW (2.76 mb)