|
manual abstract
Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled drawer into the tight space formed by the combination of the rear brackets and the aluminum extensions. The KVM module should be pushed in evenly on both right and left sides. StreamLine Console 8. Push the rear brackets all the way in and fasten them. 9. Slide the assembled drawer out. Push the KVM module box evenly toward the drawer, and then lock both units by the screws. 10. Make sure the C-36 connectors are firmly mated during step 10. 11. Connect the power supply to the power jack on the KVM module to complete the installation. StreamLine Console • Installation Consider the StreamLine Console as a set of keyboard, mouse and monitor, and connect it directly to a computer. StreamLine Console connects to a computer Or, the StreamLine Console can be connected to a Master-IT PRO KVM switch as shown below. StreamLine Console connects to a Master-IT PRO KVM switch StreamLine Console • Front Panel • KVM Control and Status: (This section is effective only when a KVM switch module is connected.) 1. Computer Selection Pad Press one of these pushbuttons to select a computer. 2. Selected Computer Indicator One of the indicators turns red when pushbuttons, hotkey or OSD menu selects a corresponding computer. 3. Local Console in operation It turns green when a computer is accessed through the StreamLine Console. 4. Remote Console in operation It turns green when a computer is accessed by another set of keyboard/mouse/monitor connected to the "Remote" console when the KVM switch is either SL-208 or SL-216. • LCD Panel Control 5. LCD Panel Menu These buttons invoke the OSD menu for the LCD panel and acts as menu selection. 6. LCD Panel Adjustment Lets you adjust settings for the LCD panel. • Keyboard Status & LCD Panel Power Switch 7. Num Lock Keyboard Num Lock status. 8. Caps Lock Keyboard Caps Lock status. 9. Scroll Lock Keyboard Scroll Lock status. 10. LCD Panel Power Switch StreamLine Console • LCD Panel Specification LCD size 15.1” TFT Active Display Area 304.1 x 228.1 (mm) Pixel Pitch (mm) 0.297 (H) x 0.297 (V) Resolution 1024 x 768 @60/70/75Hz Brightness 200 cd/M^2 Contrast Ratio 400 Display Color 16.7M (8 bits) User Control OSD Control (auto saving) Input Signal RGB analog, H/V separate Plug-n-Play VESA VESA DDC 1/2B Power Management VESA DPMS compliant “on” mode: 23.2W “stand-by” mode <= 1W “suspend” mode <= 1W “off” mode <= 1W Viewing Angle (left/right) +80 ~ -80 (up/down) +80 ~ -80 Keyboard 105 Key, PS/2 Mouse Touch Pad PS/2 StreamLine Console Limited Warranty IN NO EVENT SHALL THE ConnectPRO’s LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE PRODUCT. ConnectPROa makes no warranty or representation, expressed or implied with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, ...
Other models in this manual:Displays - SL-01 (592.89 kb)
Displays - SL-18 (592.89 kb)