Votes - 1, Average rating: 3 ( )

Manafacture: ConnectPRO File size: 592.89 kb File name: Language of manual:

It features a 15” flat panel TFT display, keyboard and a touch pad. The drawer can be pulled out for operation from the rack on slides which latch in the extended position. When not in use, the display can be folded down, locked and secured while pushed in. With different Rear bracket & extension kit, the StreamLine Console can be mounted on rack cabinet of various depths. The console comes with standard PS/2 keyboard connector, PS/2 mouse connector and HDB15 VGA connector for computer or KVM switch connection. • Features • Modularized design • Optional Master-IT PRO KVM switches available • Flip-open 15" TFT LCD panel included with resolution 1024x768 • For rack cabinet with depth from 20"(50cm) and up (with appropriate Rear bracket & extension kit) • Standard 19" 1U rack drawer • Ergonomic hand rest design • Locking mechanism locks the drawer when pulled out, pushed in, or folded down • Full 105 key, low-profile, sturdy keyboard included • Standard connectors for PC connection • Quick and easy installation StreamLine Console • Packing List These are required to install the StreamLine Console: • StreamLine Console: assembled "LCD panel + keyboard + mouse pad" drawer • Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of aluminum blocks. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet enclosure. Front Pole to rear pole distance RES-1 RES-2 RES-3 RES-4 cm inch cm inch cm inch cm inch Minimum 49.5 191/2 57.5 225/8 67.5 265/8 77.5 301/2 Maximum 57 223/8 70.5 273/4 80.5 315/8 90.5 355/8 • KVM Switch: KVM module box can be connected to a StreamLine Console or be used as a stand-alone KVM switch. Module type SK-01 SK-18 SK-28 SK-216 No. of console port 1 1 2 2 No. of computer port 1 8 8 16 KVM switch inside No Yes Yes Yes • Bolt-and-nut set • User's manual StreamLine Console • Assembly 1. Choose a proper position for the rack drawer. Mount the rear brackets (from the Rear bracket & extension kit), and lightly fasten them onto the rear vertical poles. Both will be removed later. 2. Remove the stopper from the assembled drawer. The stopper is designed to refrain the drawer from sliding out during transportation. 3. Slide the assembled drawer to the rack cabinet from the front and insert the two slide rails of the assembled drawer into the pockets of the rear brackets. 4. Fasten the assembled drawer onto the front brackets by four screws. StreamLine Console 5. Remove the rear brackets. Now, the front brackets hold the assembled drawer. 6. Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM module box. Please note the length of the aluminum extensions and mount them in one of the following ways. Short aluminum extensions attachment Long aluminum extensions attachment 7. Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled drawe...

Download now

Please, enter two numbers from picture: