Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer for procedure. Do not overfill. Use of a funnel is recommended. NOTE: There will be a slight amount of oil in the engine from factory testing. NOTE: The pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual to perform maintenance on this pump. 7 — ENG D22885 TO ASSEMBLE ACCESSORIES PANEL REMOVE SHIPPING PLUG (PCV2021) (PCH2627, PCH303
The product must be evaluated by an Porter-Cable Authorized Warranty Service Center. For the location of the nearest Porter-Cable Authorized Warranty Service Center call 1-888-559-8550, 24 hours a day, 7 days a week. • Retain original cash register sales receipt as proof of purchase for warranty work. • Use reasonable care in the operation and maintenance of the product as described in the Owners Manual(s). • Deliver or ship the product to the nearest Porter-Cable Authorized Warranty Service Cen
• Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock. • Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches. RISK OF ELECTRICAL SHOCK HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT • Contact with hot surfaces, such as engines exhaust components, could result in serious burn. • During operation, touch only the control surfaces of the pressure wa
To learn more about Porter-Cable visit our website at: The Model and Serial No. plate is located on the frame. Record these numbers in the spaces below and retain for future reference. Model No. Type Serial No. ® Copyright © 2004 Porter-Cable Corporation Part No. A08058-0412-0 2- ENG A08058 SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help
You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit. ASSEMBLY 1. Place handle assembly onto frame and connect handle to frame. 2. Connect wand to gun. Tighten securely. 3. Attach high pressure hose to gun. Tighten securely. 5. Assemble grommet kit and quick-connect nozzles as described in instructions supplied. 6. Add engine oil (supplied) to engine. Refer to engine manual
• Read the Engine Owner's Manual supplied with this unit. • Do not operate this unit until you have read the Engine Owners Manual for Safety, Operation, and Maintenance Instructions. • Check for visible shipping damage. Shipping damage will cause problems in operation of this unit. • If you experience any problems and need assistance, please call us at our toll free number 1888- 559-8550, 8:00 a.m. to 8:00 p.m. C.S.T. • If you need warranty repair or service part purchase, you can locate an Auth
You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit. ASSEMBLY 1. Place handle assembly onto frame and connect handle to frame. 2. Connect wand to gun. Tighten securely. 3. Attach high pressure hose to gun. Tighten securely. 5. Assemble grommet kit and quick-connect nozzles as described in instructions supplied. 6. Add engine oil (supplied) to engine. Refer to engine manual
• Never permanently secure trigger in pull back (open) position. 5- ENG A09608 A09608 6- ENG ASSEMBLY INSTRUCTIONS 1. Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place. CARTON CONTENTS Engine Frame and Wheel Assembly High Pressure Hose Spray Gun Quick Connect Spray Wand Handle Chemical Hose Bagged Parts Nozzle Cleaning Tool Engine Manual Quick Connect Nozzles Nozzle Holder Formed Rubber Covers Operation Man
Never pull water supply hose to move pressure washer. This could damage hose and/or pump inlet. DO NOT use hot water, use cold water only. Never turn water supply off while pressure washer engine is running or damage to pump will result. DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged. If you do not understand
DO NOT attempt to increase pump pressure. A higher pressure setting than the factory set pressure may damage pump. DO NOT try to turn pressure regulator knob past the built-in stop or damage to pump will result. HOW TO USE WAND For Multi-Reg Wands (PCV2021): Your pressure washer is equipped with a multi-reg wand with both high and low pressure settings. The high pressure setting is for cleaning and rinsing, the low pressure setting is for applying chemicals or cleaning solutions to surfaces. RIS