Votes - 4, Average rating: 4.5
(
)
)
|
manual abstract
• Never service or store the blower in the vicinity of open flames, sparks, etc. (11). • Always store the blower in a well-ventilated locked room and with an emptied fuel tank. Observe and follow all relevant accident prevention instructions issued by the trade associations and by insurance companies. Do not perform any modifications to the blower as this will risk your safety. The performance of maintenance or repair work by the user is limited to those activities as described in this instruction manual. All other work is to be done by Authorized Service Agents. Use only genuine spare parts and accessories supplied by DOLMAR. Use of non-approved accessories and tools means increased risk of accidents and injuries. DOLMAR will not accept any liability for accidents or damage caused by the use of any non-approved attachment or accessories. First Aid In case of accident make sure that a well-stocked first-aid kit is available in the vicinity of the operations. Immediately replace any item taken from the first aid kit. When asking for help, please give the following information: • Place of accident • What happened • Number of injured persons • Extent of injuries •Your name Packaging The DOLMAR blower is delivered in a protective cardboard box to prevent shipping damage. Cardboard is a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling). (10) (11) (12) 5 SPECIFICATION Model PB-250.4 PB-251.4 Mass (without blower pipe) (kg) 4.5 (9.9 lbs) Dimension (without blower pipe L x W x H) (mm) 350 . 231 . 368 (13.8 . 9.1 . 14.5 in) Max. engine speed ( /min) 7,800 Idling speed ( /min) 3,500 Engine displacement (mL) 24.5 (1.49 cu,in) Fuel Automobile gasoline Fuel tank capacity (L) 0.52 (17.6 fl.oz) Engine oil SAE 10W-30 oil of API Classification, Class SF or higher (4-stroke engine for automobile) Engine oil volume (L) 0.08 (2.7 fl.oz) Carburetor (Diaphragm-carburetor) WALBRO WYL Ignition system Solid state ignition Spark plug NGK CMR6A Electrode gap (mm) 0.7 - 0.8 (0.028-0.031 in) Noise Level(50 Feet per ANSI B175-2-2000) (dB(A)) 67 Notes: 1. Use the oil and spark plug specified by DOLMAR. 2. This specification is subject to change without prior notice. 6 DESIGNATION OF PARTS Vacuum set (Optional) Optional DESIGNATION OF PARTS DESIGNATION OF PARTS DESIGNATION OF PARTS DESIGNATION OF PARTS 1. Stop switch 8. Fuel Tank 15. Plug Cover 22. Vacuum Pipe A 2. Main Handle 9. Fuel Tank Cap 16. Spark Plug 23. Vacuum Pipe B 3. Trigger Lever 10. Muffler 17. Oil Cap 24. Vacuum Pipe C 4. Primer Pump 11. Assist Handle 18. Blower Tube 25. Arrow Mark 5. Air Cleaner Cover 12. Cruise Control Lever 19. Blower Nozzle A 26. Dust Bag 6. Choke Lever 13. Screw 20. Blower Nozzle B 7. Starter Handle 14. Protector 21. Elbow 7 ASSEMBLY INSTRUCTIONS CAUTION : Before performing any work on the blower, always switch off the motor and pull the sparkplug connectors off the spark plug. Always wear protective gloves! CAUTION : Start the blower...
Other models in this manual:Hair Clippers - PS-410 (3.24 mb)
Hair Clippers - PB-250.4 (3.24 mb)
Hair Clippers - PB-500 R (3.24 mb)
Hair Clippers - PS-33 (3.24 mb)