All Rights Reserved. RadioShack, RadioShack.com, and Adaptaplug are trademarks used by RadioShack Corporation. cassette recorder stops operating properly, replace the batteries. Warning: Dispose of old batteries promptly and properly. Do not burn or bury them. Caution: If you do not plan to use the cassette recorder with batteries for a week or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. USING AC OR DC POWER You can power the cassette recorder wi

Using an adapter that does not meet these specifications could damage the cassette recorder or the adapter. • Always connect the DC adapter to the cassette recorder before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the cassette recorder. 1. Set the adapter’s voltage switch to 9V, if necessary, then connect the Adaptaplug to the DC adapter’s cord so the tip reads TIP–. 2. Insert the barrel plug into the recorder’

PLAYING THE NUMBER GAME The objective of Game 2 is to clear the number shown by pressing the same number, using the number buttons. To select the number game, hold down GAME for about 3 seconds until 000 and 32 PlayingtheGames 14-1250.DS.fm Page 33 Tuesday, May 16, 2000 2:32 PM 1 appear. Then press GAME again. 0000 and 2 appear. 1. Press +5 once to start the game. Numbers from 1 to 5 appear, one at a time, at random. 2. As you see a number, press that button (1–5). If you press the correct butto

This can cause playback sound quality to deteriorate. To restore the sound quality, fast- forward the tape from the beginning to the end of one side, then completely rewind it. Then loosen the tape reels by gently tapping each edge of the cassette on a flat surface. Caution: Be careful not to damage the cassette when tapping it. Do not touch the exposed tape or allow any sharp objects near the cassette. Erasing Tapes To record over a cassette tape, simply record as usual. The cassette deck recor

Cat. No. 20-219B FEATURES Your Radio Shack DX-392 PLL All- Band Portable Receiver with Cassette Recorder brings the voices of the world to you. In the 13 international shortwave (SW) bands, you can hear news broadcasts and other programs from sources such as the British Broadcasting Company, Radio Cairo, and Radio Moscow. You can get emergency information firsthand by listening to amateur radio broadcasts, which include single sideband (SSB) voice transmissions and continuous wave (CW) Morse cod

21 FCC Information ............................................................................................ 22 Cleaning the Tape-Handling Parts ................................................................. 22 Specifications ..................................................................................................... 23 4 14-543.fm Page 5 Wednesday, June 30, 1999 3:52 PM PREPARATION Important: • Complete all connections to the CD-3319 before you connect it to power. • Be sure to f

14-1265.fm Page 2 Wednesday, July 5, 2000 10:02 AM ¶ Table of Contents Features ............................................. 3 The FCC Wants You to Know ......... 6 Preparation ........................................ 7 Using the Belt Clip .......................... 7 Powering the cassette player .......... 8 Setting the Clock ........................... 15 A Quick Look at Your Cassette Player ....................... 19 Using the Radio ............................... 20 Using the Cassette Playe

Your RadioShack Voice-Activated Cassette Recorder provides time-tested recording convenience in an affordable package. The recorder’s voice-activation feature lets you record only when there is sound, providing hands-free operation while recording. The built-in microphone is sensitive enough for the boardroom, a seminar, or a lecture hall. And your recorder is small enough to fit in your briefcase or purse, so it can go wherever you go. Tape Counter — button. having to use an One-Touch Recording

Both are available at your local RadioShack store. Caution: You must use a Class 2 power source that supplies 6V DC and delivers 300mA. Its center tip must be set to negative and its plug must fit the recorder's DC 6V jack. Using an adapter that does not meet these specifications could damage the recorder or the adapter. 1. Set the adapter’s voltage switch to 6V. 2. Attach the Adaptaplug to the adapter’s cord with the tip set to negative. 3. Insert the adapter’s barrel plug into the recorder’s D