Votes - 3, Average rating: 4 ( )

Manafacture: Sony File size: 3.52 mb File name: Language of manual:

NOTE) Be sure that the lead wire does not come to contact with the heat exchanger. Fixing screw Wiring holding bracket Holding metal fitting for fan motor lead wire Concave part of ceiling panel Fan motor lead wire 104 No. Part name Procedure Remarks 11 Drain pan 1. Detachment 1) Perform works of procedure 4 -1 and 8 -1. 2) Remove the drain cap and extract drain water accumulated in the drain pan. NOTE) When removing the drain cap, be sure to receive drain water with a bucket, etc. 3) Take off screws fixing the drain pan to remove the drain pan. (O4.10, 4 pcs.) 2. Attachment 1) Insert the drain cap into the drain pan. NOTE) Put a stick or others into hole at center of the drain cap, and then insert the drain cap until it strikes on the socket of the drain pan. 2) Draw each lead wire to the correct positions, and then insert the drain pan into the main unit. NOTE) Draw lead wires of the drain pump and the float switch along the guide of the cabinet. Insert the drain pan along the guides of sensors (TC1, TC2, TCJ) and PMV lead wire. The drain pan and each lead wire are not caught in; otherwise water leakage may be caused. 3) Fix the drain pan with screws. (O4 . 10, 4 pcs.) 2 screws Soc et of drain pan Drain pan Soc SocSoc k kkk et of dr et of dret of dr ain pan ain panain pan Dr DrDr ain pan ain panain pan 2 screws Piping holder Lead wire Piping holder rPiping holder r Piping holder rPiping holder r i iii b bbb 12 Drain pump assembly 1. Detachment 1) Perform work of procedure 11 -1. 2) Pick up the hose band and slide it from the pump connecting part to remove the drain hose. 3) Take off screws (O4 . 10, 3 pcs.) fixing the drain pump assembly, and then move hooking claw (1 position) of the main body from the drain pump assembly to remove the drain pump assembly. 2. Attachment 1) Fix the drain pump assembly as original. NOTE) For fixing, use a hooking claw (1 position) and screws (3 positions). When screwing, be sure not to run on the hooking claw at main body side. 2) Mount the drain hose and the hose band as original. NOTE) Insert the drain hose up to the end of pump connecting part, and then put the band at white marked position of the hose. Hooking cla or drain pump Drain pump assembly Drain hose Fixing scre or drain pump Hose band Hooking cla Hooking claHooking cla w www f fff or dr or dror dr ain pump ain pumpain pump Dr DrDr ain pump assemb ain pump assembain pump assemb ly lyly Dr DrDr ain hose ain hoseain hose White mar ed positionWhite mar White marWhite mar k kkk ed position ed positioned position Fixing scre Fixing screFixing scre w www f fff or dr or dror dr ain pump ain pumpain pump Hose band Hose bandHose band 105 106 No. 13 Part name PMV (Pulse Motor Valve) Procedure 1. Detachment 1) Perform work of procedure 11 -1. 2) Take off screws (O4 . 10, 3 pcs.) fixing the piping cover to remove the piping cover. 3) Cut off binding band that binds the PMV lead wires. 4) Peel butyl rubber of...

Download now

Please, enter two numbers from picture: