Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Store a Station Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear in the display. Recall a Station Select a band (if needed). Press a preset button (5-10) to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) Automatically Store Select a band (if needed). Press and hold the AS/PS (15) button for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. NOTE: During Auto Store (AS), the tuner will default to “Local” mode while scanning the band initially. After scanning the entire band once, the unit will switch to “Distant” mode for all subsequent Auto Store tuning. Preset Scan Select a band (if needed). Press AS/PS (15) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. 3 2a 4 11 13 12 14 15 16 18 19 17 1 20 21 2b WMS190 40W x 4 8 6 5 7 9 10 WMS190 7 SIRIUS RADIO OPERATION NOTE: Access to Sirius® satellite radio requires installation of a separate Sirius tuner and antenna. Listeners can subscribe to Sirius radio on the internet by visiting or by calling (888) 539-SIRIUS. Customers should have their Sirius ID ready (Sirius ID is located on the Sirius tuner, sold separately). Customers can listen to music samples by tuning to channel 184. Switching to SIRIUS Mode Press the MODE button (4) to change the mode to Sirius radio mode. Accessing your SIRIUS ID 1. In Sirius mode, press and hold the BAND/SEARCH button (16) to select DIRECT mode. 2. Press the MODE button (4) to activate Direct mode. 3. Press the MODE button for each digit to enter “000”. 4. Press MODE again to confirm. This will display the Sirius ID number for your tuner. 5. The Sirius ID number will scroll twice and then freeze with the first 11 digits on the display. Press the INFO/SCROLL button (12) to display the remaining digit. Selecting a Band In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in the following order: S1, S2, S3. Category Tuning 1. Press the CAT - /+ buttons (13/14) to change the category. Each category title and song title will be displayed in increments. 2. While in the category mode, press the CAT - /+ buttons again to view category names. (The lowest channel number within the chosen category will always be the default first channel tuned.) 3. Press the MODE button (4) or the TUNE/TRK |<< / >>| buttons (20/21) to choose desired channels in that category. 4. Press the TUNE/TRK buttons to select a channel within the chosen category. 5. Press MODE to confirm channel selection. Channel Up/Down Tuning Press the TUNE/TRK |<< / >>| buttons (20/21) to search for a channel. Press and hold the TUNE/TRK buttons to fast search. Storing Preset Channels The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your favorite channels. Programming Channels 1. Select the channel you want to store in memory. 2. Press and hold a preset button (5-10) until the corresponding preset button number appears. 3. Repeat steps 1 and 2 to program additional channels. Quick Tuning Press one of the six preset buttons (5-10) to select a preset channel directly. Channel Direct Access Searching 1. Press and hold the BAND/SEARCH button (16) to access Direct Tune mode. “DIRECT-T” appears on the display for a few seconds. 2. Press the MODE button (4) to confirm. 3. Press the TUNE/TRK |<< / >>| buttons (20/21) to move between the three digits. 4. Use the VOL +/- buttons (2) to select a number for each position. 5. Press the MODE button to confirm each digit. 6. Press the MODE button again to tune to the selected file. Alternate Display Information Press INFO/SCROLL button (12) to change the display information in the following order: ARTIST NAME > SONG TITLE > CATEGORY > CHANNEL NAME. Satellite Signal Strength The display will indicate satellite reception strength as shown below. 3 2a 4 11 13 12 14 15 16 18 19 17 1 20 21 2b WMS190 40W x 4 8 6 5 7 9 10 Signal Strength Strength Display No Signal Weak Good Excellent WMS190 CARE AND MAINTENANCE TROUBLESHOOTING • Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. • Keep the product away from dust and dirt, which can cause premature wear of parts. • Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. • Wipe the product with a dampened cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the product. • Use and store the product only in normal temperature environments. High temperature can shorten the life of electronic devices, damage batteries, and...