Votes - 3, Average rating: 4.7 ( )

Manafacture: Bosch File size: 20.42 mb File name: Language of manual:

Maximum processing quantity: 250 g fruit or vegetables. Blender Fig. H A Risk of injury from sharp blades/ rotating drive! Never place fingers in the attached blender! Blender will not operate until the lid has been screwed on tight. Do not remove/attach the blender until the drive is at a standstill. A Risk of scalding! If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0.4 litres of hot or frothing liquid. 14 Robert Bosch Hausgeräte GmbH en Warning! Blender may be damaged. Do not process deep-frozen ingredients (except ice cubes). Do not operate when empty. • Attach the blender jug (match arrow on the jug to the arrow on the appliance) and rotate as far as possible in a clockwise direction. • Add ingredients. Maximum capacity - liquid = 1.25 litres (frothing or hot liquids max. 0.4 litres). Optimal processing capacity - solids = 80 g. • Attach lid and rotate in a clockwise direction. Lid lug must be located fully in the slot in the blender handle. • Set the rotary switch to the desired setting. • To add more ingredients, set the rotary switch to 0/off. • Remove the lid and add ingredients or • remove the funnel and gradually add solid ingredients through the feed tube or • pour liquid through the funnel. After using the appliance • Set the rotary switch to 0/off. • Pull out the mains plug. • Remove tool or accessory according to the following description. • Clean all parts, see “Cleaning and servicing”. Remove the bowl with accessories/tools: • Rotate the lid in an anti-clockwise direction and remove. • Remove tool: - Take tool holder together with universal blade, whisking disc or kneading hook out of the bowl. Remove the tools from the tool holder. - Grip the carrier disc or the chipper disc by the recessed grips and lift out of the bowl. - Turn the carrier disc over and carefully press out the insert from the underside (Fig. 0). • Rotate the bowl in an anti-clockwise direction and remove. Remove the citrus press • Unscrew the citrus press and remove the bowl. Remove the juice centrifuge: • Rotate the lid on the juicer in an anticlockwise direction and remove. • Take the grater out of the bowl. • Remove the bowl. Remove the blender: • Rotate the blender in an anti-clockwise direction and remove. • Rotate the lid in an anti-clockwise direction and remove. Tip: It is recommended to clean the blender after use see “Cleaning and servicing”. Cleaning and servicing A Risk of electric shock! Never immerse the base unit in water or place under running water. Warning! Surfaces may be damaged. Do NOT use abrasive cleaning agents. Note: If processing e.g. carrots and red cabbage, the plastic parts will become discoloured by a red film which can be removed with a few drops of cooking oil. Cleaning the base unit • Pull out the mains plug. • Wipe the base unit with a damp cloth. If required, use a little detergent. • Then dry the base unit. • Rinse the accessories drawer under running water and leave to dry. Do not clean in the dishwasher! Cleaning the bowl and accessories A Risk of injury from sharp blades! Grip the universal blade by the edge of the plastic handle only. When not in use, always put the universal blade back into the accessories drawer. All parts are dishwasher-safe. Do not wedge plastic parts in the dishwasher as they could warp. Cleaning the blender It is recommended to clean the blender immediately after use. Robert Bosch Hausgeräte GmbH 15 en This will prevent residue from drying on and attacking the plastic (e. g. by essential oils in herbs). The blender jug (without blade insert), lid and funnel are dishwasher-safe. Do not clean the blade insert in the dishwasher, but under running water (do not soak in water). Tip: Pour a little water and washing-up liquid into the attached blender. Switch to setting M for several seconds. Pour out the water and rinse the blender with clean water. Taking the blender apart Fig. D • Upon the flanks, rotate the blade insert in an anti-clockwise direction. The blade insert is released. • Take blade insert out and remove sealing ring. Putting the blender together A Risk of injury! Never assemble blender on the base unit. • Apply sealing ring on blade insert. • Insert blade insert from below into blender jug. • Firmly screw on the blade insert by the wings in a clockwise direction. Rotate the blade insert at least until a wing covers the mark on the blender jug (position -> Fig. D 6). Cleaning the citrus press All parts are dishwasher-safe. It is recommended to rinse the pressing cone immediately after use on all sides under running water. Doing so prevents residue from drying on. Cleaning the juice centrifuge Fig. B To clean the juice centrifuge remove the filter basket from the disc holder. Pre-rinse parts under running water. Carefully clean the slats of the filter basket so as not to damage them. Storing the appliance • Pull out the mains...

Download now

Please, enter two numbers from picture: