Votes - 4, Average rating: 3.5 ( )

Manafacture: Panasonic File size: 1.14 mb File name: Language of manual:

(Some station names may also appear if Channel Caption is set. See page 28.) Warnina and Instruction Disolavs These disPlays wiH a'ert y°ut0 a missed warning ana instruction uispiays operation or provide further instructions. OSD Caution Page PLEASE SET CLOCK BEFORE PROGRAMMING • If you attempt to set or review a Timer Recording, or set the On-Timer and the Clock is not set... 8- 11 CHECK CASSETTE RECORD TAB • If you press REC, and a cassette is inserted with no record tab... 3, 12 TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC • If you press STOP during a Timer Recording... 23 N0 CASSETTE PLEASE INSERT A CASSETTE • If you press PLAY, FF, REW, or REC without a cassette inserted... 12 PLEASE PREPARE FOR TIMER REC • If the unit is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin... 22, 23 VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END: PLAY KEY • If head cleaning becomes necessary while playing back a tape... 4 VCR LOCK ACTIVATED • If you press a function button other than STOP/EJECT or POWER while the unit is in VCR Lock mode... 27 32 For assistance, please caD : 1-800-211-PANA(7262) or send email to : согкитефгххк^Зрапазопкхсот Before Requesting Service Check the following points once again if you are having trouble with your unit. Power Correction No power... • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Monitor Correction No picture or sound... Poor picture with normal sound... Poor sound with normal picture... Poor TV reception... No color or poor color... Ghost (multiple) images... TV programs cannot be watched... Channel cannot be selected... • Make sure your antenna system (TV or CABLE), is correctly set (P. 8) • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. • Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP TV menu. (P. 15) • Adjust VOLUME control. (P. 14) • Adjust SHARPNESS and PICTURE oorttids in the SET UP TV menu. (P. 15) • Adjust TINT and COLOR controls in the SET UP TV menu. (P. 15) • Install a directional antenna. • Make sure the selected channel is in unit’s memory. (P. 10,11) • Only the channel being recorded can be viewed on this unit. VCR Correction TV program cannot be recorded... Timer recording cannot be performed... No playback picture, or the playback picture is noisy or contains streaks... VCR cannot be controlled... • Make sure your antenna system (TV or CABLE), is cotredfy set (P. 8) • Make sure cassette record tab is intact. (P.3) • Check that clock is set to current time and date. • Make sure DSS/CABLE box (if used) is left on and tuned to channel to be recorded. • Set recording Start/Stop times correctly. (P. 22-23) • Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer recording even after power is restored. • Adjust TRACKING control in either direction. (P. 4) • Try Head Cleaning. (P. 4) • Make sure VCR LOCK is set to off. (P. 27) • Make sure unit is not in a Timer Record operation. Remote Control Correction Unit cannot be controlled... ACTION, PROG and FM/TV buttons cannot be selected... • Aim remote at remote sensor on unit (P. 7) so that signal is unobstructed. • Inspect the remote batteries. (P. 3) • Make sure VCR LOCK ts set to off. (P. 27) • Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference. • Check remote batteries. Miscellaneous Correction Video cassette cannot be inserted... Video cassette cannot be removed... Tape cannot be ejected or inserted... Video cassette ejects when a recording is started, or the power is turned off for timer recording... In Stop mode, the VCR motor (CYLINDER) continues to rotate... VCR cannot be controlled... • Insert the cassette window side up; record tab facing you. • Completely insert Power Plug into an AC outlet. • Try ejecting or inserting the tape again after tumrtg POWER off, then back on. • Make sure cassette record tab is intact. (P. 3) • To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. • Make sure VCR LOCK is set to off. (P. 27) If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262) To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to: consumerproducts@panasonic.com. 33 For Your Information Servicenter List For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquires please contact: 1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail : consumerproducts@panasonic.com Web Site: You can purchase parts, or your our Web Site. Accessory 1-800-332-5368...

Download now

Please, enter two numbers from picture: