Votes - 3, Average rating: 4.7 ( )

Manafacture: Samsung File size: 1.15 mb File name: Language of manual:

Other manuals for this model:

Air Conditioner & Split Systems - AW0603B (1.58 mb)

. If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 4 To set the fan speed: . Press the button on the remote control as desired. or . Press the , or button on the unit one or more times until theFan Speed desired Fan speed(F1, F2 or F3) is displayed. 5 To control the direction of the air flow, refer to page 11. Airing Your Room E-9 Remote Control Control Panel If you want to provide air circulation without cooling, you can use the Fan mode. 1 If necessary, press the (On/Off) button. Result: . The air conditioner starts up in the Cool mode. . The unit beeps twice. 2 If the fan speed(F1, F2 or F3) is not displayed on the control panel: . Press the Mode Cool/Dry/Fan button on the remote control or . Press the button on the unit one or more times until the fan speed (F1, F2 or F3) is displayed. Result: . The unit beeps each time you press the button. . The air conditioner starts up in Fan mode. . You can change modes at any time. When the air conditioner is in the Fan mode, the temperature cannot be set or displayed. /Mode Cool/Dry/Fan To set the fan speed: , or button on the unit one or more times until theFan Speed . Press the button on the remote control as desired. or . Press the desired fan speed(F1, F2 or F3) is displayed. 4 To control the direction of the air flow, refer to page 11. E-10 Removing Excess Humidity Remote Control Control Panel If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the (On/Off) button. Result: . The air conditioner starts up in the Cool mode. . The unit beeps. . . The air conditioner is fitted with a protection mechanism to pre vent the unit from being damaged when it is started immediately after being: . Plugged in . Stopped It will start up normally after three minutes. 2 If the temperature is not displayed on the control panel: . Press the button on the remote control or . Press the button on the unit one or more times until the temperature is displayed. Result: . The unit beeps each time you press the / button. . The air conditioner starts up in the Cool mode. . You can change modes at any time. 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 64°F and 86°F inclusive. Result: . Each time you press the or buttons: -The temperature is adjusted by 1°F -The unit beeps . The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 11. Adjusting the Air Flow Direction Horizontally The outer air flow blades can be adjusted to control the vertical air flow direction. (Except AW0503B / AW0505B /AW0509B/ AW0603B/AW0605B/AW0609B) Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Adjust the air flow blades to the desired position by sliding them side to side. Adjusting the Air Flow Direction Vertically RECOMMENDATION When... Adjust the blades to face... Cooling Upwards. Adjust the air flow blades to the desired position, by pushing them upwards or downwards. . If you orient the air flow blades downwards and the unit operates in Cool mode for long periods of time, dew may: -Form on the surface of the blades -Drip from the blades E-12 Setting the On Timer Remote Control Control Panel The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You can select the On timer when the air conditioner operates in the Cool or Dry mode. 1 Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. 2 Set the operating time by pressing the button on the remote control or Timer button on the unit one or more times until the desired time is dis- Timer played. The operating time can be set between 1 and 24 hours. Result: . Each time you press the button: – The time is adjusted by 1 hour and displayed on the control panel – The unit beeps . The operating time is displayed and decreases automatically to indicate the remaining time. . The air conditioner starts up in the Cool or Dry mode automatically when the operating time reaches zero. . You can select the fan speed, temperature and Energy saving mode after setting the On timer and Off timer mode. However, when you change the mode, the On timer and Off timer mode is canceled. To Cancel the On Timer To cancel the timer, press: . Timer on the remote control or unit one or more times until "--" is displayed. or . The (On/Off) button on the remote control or unit (The air conditioner operates in the mode selected when the unit was last used.) Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer o...

Download now

Please, enter two numbers from picture: