Votes - 3, Average rating: 3.3 ( )

Manafacture: Samsung File size: 6.09 mb File name: Language of manual:

Other manuals for this model:

Air Conditioner & Split Systems - AS18PJGE7/FMC (6.09 mb)

Air Conditioner & Split Systems - AS18PJGE7/FMC (6.09 mb)

Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features. The booklet is organized as follows. The following figures are shown on pages from 4 to 6 : - Indoor and outdoor units - Remote control(buttons and display) They will help you find the buttons and understand the symbols displayed. In the manual, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use three different symbols: PRESS PUSH HOLD DOWN PRESS PUSH HOLD DOWN ENGLISH E-7 Inserting the Remote Control Batteries Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities : + on the battery with + on the remote control. - on the battery with - on the remote control. 1 2 3 Close the cover by sliding it back until it clicks into place. Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used. You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Notte E-8 Selecting the Automatic Operating Mode E-9 ENGLISH You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically. 1 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in AUTO mode. 2 You can change modes at any time. If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT Notte Cooling Your Room 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in COOL mode. 2 Notte You can change modes at any time. To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 3 Select the fan speed by pressing the button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 5 To control the direction of the air flow, refer to pages 16 and 17. You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling E-10 Changing the Room Temperature Quickly E-11 ENGLISH The Turbo cooling function is used to cool your room as quickly as possible. Examplle : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Press the button. Result: The temperature and fan settings are adjusted automatically. The air conditioner cools the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button again. Resu...

Download now

Please, enter two numbers from picture: