Login:
Votes - 0, Average rating: 0 ( )

User manual Lenovo, model A600 All-in-One (ideacentre)

Manafacture: Lenovo
File size: 2.59 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Bluetooth configuration
To start the games
Air mouse
Install the batteries as indicated below.
In addition to the functions of a normal
7
remote control, the air mouse can also be
Headphone
used as a regular mouse.
LED indicator of Bluetooth
LED indicator of joystick game
1
Pull the lid of the battery compartment
The air mouse
LED indicator of CD game
on the back of the remote control.
When the Bluetooth indicator light blinks twice every
buttons are:
Power
Game switch
second and at the same time the remote control
Phone On/Off
Press the Game button to switch to the
OK
Left air mouse button,
Record
Stop
makes a beep sound, it means that the remote con-
CD game mode.
2
Air mouse On/Off
Rewind
Fast forward
trol is waiting for Bluetooth connection and the steps
Play or pause
Insert the batteries and close the
button, Right air
Replay
Skip
lid of the battery compartment.
to add Bluetooth devices to the OS can be started.
mouse button.
Windows Media Center Start
Make sure the position of
8
the polarities of the batteries
When the air mouse
Back
More
is identical to the image.
Select the Lenovo_RC icon from the Add a device
On/Off button is on, it
Direction
Note: Use good batteries and place them
dialog box and click Next. Select Enter the device's
is ready for use.
correctly in order to avoid malfunction or
pairing code and enter the password 0000. Once the
OK
possible damage of the remote control.
Bluetooth connection has been completed successfully,
the Bluetooth indicator light will turn on and the remote
3
Press the air mouse On/Off button
Air mouse ON/OFF
control can now work properly.
Left air mouse/Game A
When the M indicator light is on, it
Right air mouse/Game B
A
B
OK
to switch between the air mouse
The remote control is now ready to be configured
means that the CD game mode has
9
and the remote control.
Volume up/Game X
Channel Up/Game Y
X
Y
by executing the following steps below.
been switched on.
Mute
Volume down/Game
Channel down/Game throttle down
throttle up
Guide
4
Once the Bluetooth connection has been completed
ABC
DEF
To open the Devices and Printers dialog box, go to
successfully, the Bluetooth LED indicator becomes
GHI
JKL
MNO
Digit/Input sources
Windows and click Start -> Control Panel ->
solid and the remote control can be used.
PQRS
TUV
WXYZ
Hardware and Sound.
* key

# key
Do not press Play and digit 1 again after having
Clear
5
completed successfully the Bluetooth connection.
Enter
Teletex On/Off (Select models only)
Press Add a device and pop-up a dialog box. The
Doing so will restart the pairing process.
procedure to establish connection as described in
(Select models only )
Bluetooth audio configuration.
the steps below needs to be finished within 180
seconds. Failing to do so will require you to repeat
1
In the Add Wireless Device dialog box, right click on
Microphone
the steps until the connection has been completed
Lenovo_RC device and select Properties in the
successfully.
menu.
Turn on/off/switch to games
6
2
Turn on/off the air mouse
Check the Headset box under the Services tab in
Insert the Game CD in the optical drive and
Turn on/off the telephone
Press Play and digit 1
the Properties dialog box. Click OK.
follow the prompts to start the games. Use the
Turn on the Windows Media Center
at the same time for
Right-click on Lenovo_RC device and select Control
remote control to install and play the games.
Hold the air mouse horizontally.
Notes:
about 10 seconds.
3
When the Games mode and Windows Media Center are both turned on at the same time,
in the menu.
For more information about the games, check
Do not use the air mouse in a slanted or
the direction and OK buttons only work for games and do not work for Windows Media
Center. For joystick games, the Volume Up/Down buttons as well as the Channel
4
Under the Device Operations tab, if the computer is
out Access Help on the Game CD.
vertical position. Doing so might result in the
Up/Down buttons function as Game X/Y and Game throttle up/down buttons. You cannot
not connected to your Bluetooth headset (Lenovo_RC),
pointer moving into another direction other
use them to adjust volume or to switch channels.
click on Connect to establish the Bluetooth connection.
than the intended one.
Important information on how to use the remote control
Remove all batteries when you do not use them for a long time to avoid possible leakage. Use reliable good quality alkaline battteries. You can use the remote control in the following directions according to your games:
Too close to the computer.
0 -1 meter (0 – 3 feet)
?
Suggested range:
1 - 3 meters (3 -10 feet)
Too far from the computer.
Over 3 meters (over 10 feet)
30
The optimum distance between the remote control
Make sure there are no physical obstacles
and computer is 1 - 3 meters (3 -10 feet).
The best angle to use the remote control is
between the remote control and the computer
within 30°.
that could block the Bluetooth connection.
CAUTION
CAUTION
Note:
Bluetooth LED solid:
When in air mouse and game mode, if the remote control does not move
means that the battery power is low and the remote control will turn
When using the remote control,
Do not use the remote
Indicates a normal Bluetooth connection to the computer. Otherwise, this
or no button is pressed during 10-20 seconds, the remote control switches
off automatically after 10 minutes.
make sure the remote control's
control when your hand
wrist strap is adjusted tightly
or the remote is wet. You
indicates disconnection or that the remote control is in sleep mode.
to sleep mode. During sleep mode, the Bluetooth connection remains on
around your wrist to avoid hitting
might receive an
electrical shock and
and the Bluetooth LED will be solid. Move the remote control or press any
When the remote control power indicator blinks 3 times per second
people or objects around you.
damage the remote
M LED solid:
button to switch back to its previous mode.
during 3 seconds and if in telephone mode there are 3 beeps during
control.
Indicates that the CD game is active and can be manipulated by the
3 seconds, this indicates that the remote control cannot be used.
remote control.
When in telephone mode, the remote control will never switch tostandby
You need to replace the batteries to use it again. After replacement
or sleep mode.
of batteries, the indicator light will stop blinking.
CAUTION
CAUTION
3D LED solid:
Indicates that the joystick game is active and can be manipulated by the
In any mode other than telephone mode, if there is no operation within 10
In Windows MCE mode:
Do not throw the
remote control.
minutes after switching to standby mode, the remote control enters sleep
MCE remote control works normally. Press the related button to turn
Be aware of the people
remote control at will
to avoid hitting
mode. As a result, the Bluetooth connection between the computer and
on the air mouse, game or wireless telephone function.
and the objects
around you when you
someone or damaging
something.
Game switch button:
the remote control will disconnect and the Bluetooth LED light will turn off.
use the remote control.
Used to switch among the 3 different game modes - CD game,
In Air Mouse mode:
joystick game, or to turn off the game. Press the button once to
Press any button to wake up the remote control. However, wait for a
MCE remote control and air mouse work normally. Press the related
switch to another mode.
moment to restore the Bluetooth connection. No pairing is needed when it
button to turn on the game or wireless telephone function.
is woken up from standby mode or sleep mode.
CAUTION
The remote control is the standard MCE remote control for the
In Telephone mode:
model configured with Windows MCE.
When the computer goes into standby mode (S3), sleep mode (S4) or is
MCE remote control and wireless telephone function work normally.
turned off (S5), the remote control will go into sleep mode, disconnecting
Press the related button to turn on the game or air mouse function.
The Telephone and Air mouse buttons need to be pressed for
the Bluetooth connection. After waking up or restarting the system, you
CAUTION
more than 1 second to turn these functions on. Additional software needs
may press any button on the remote control to renew the Bluetooth
In Game mode:
to be installed in order to use the telephone.
connection.
The Game function works normally. Press the related button to turn
Do not swirl the remote
on the air mouse, MCE remote control or wireless telephone function.
control by the wrist
strap to avoid hitting
Note: When using the remote control, make sure the front side
Use the remote control normally to save battery power. When the
someone or damaging
Keep a safe distance from all the objects and
something.
people within your reach. Pay attention to the
faces up.
remote control power indicator blinks every three seconds, this
lighting devices over your head to avoid damaging
the remote control.


...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category