Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
Straddle the edge with the nails and twist the drill guide so the nails are stopped on the front and back face of the workpiece. INSTRUCTIONS 1. Locate and mark the center of the hole to be drilled with an awl or center punch. 2. Insert the 3/i6" bushing into the drill guide and insert the Centerpunch/Locator into the bushing. 3. Place the drill guide over the workpiece and center the Locator over the center mark. 4. Without moving the drill guide, remove the Locator and W bushing from the drill guide. 5. Insert the desired size drill bushing with the large end up into the drill guide. 6. Insert the appropriate size drill bit into the drill bushing and drill the hole. Awarning Wear ANSI approved safety glasses STEELEX PLUS® IS A REGISTERED TRADEMARK OF Visit our website: shopfox.biz 360-734-3482 FAX: 360-671-3053 D3206 DRILL GUIDE KIT gutÉÉL Manufactured in Taiwan for Woodstock International, Inc....