Votes - 3, Average rating: 3.3 ( )

Manafacture: Tripp Lite File size: 43.96 kb File name: Language of manual:

4. Insert the driver diskette and press Enter. 5. Select Silicon Image SiI 0680 ATA/133 Controller and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete Windows NT 4.0 installation. For Existing Windows NT 4.0 Installation 1. Install the board and boot up Windows NT 4.0. 2. Double click My Computer/Control Panel/SCSI Adapters, then click the Drivers tab. 3. Click Add… then Have Disk.... 4. Insert the driver diskette, type in A:, then click OK. 5. Highlight Silicon Image SiI 0680 ATA/133 Controller and click OK. 6. Click OK, remove the driver diskette and restart NT to complete driver installation. To Verify Windows NT 4.0 Installation To Verify Windows NT 4.0 Installation . Double click My Computer/Control Panel/SCSI Adapters. 2. Highlight Silicon Image SiI 0680 ATA/133 Controller from SCSI Adapters listing and click Properties. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed. Windows 2000 For New Windows 2000 Installation 1. Install the board and follow Microsoft procedures to install Windows 2000 accordingly. 2. Restart your system when prompted during Windows' installation. 3. At the Windows 2000 Setup screen, press F6 to install the driver. 4. Insert the driver diskette. Press S, then press Enter. 5. Select Silicon Image SiI 0680 ATA/133 Controller and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete installation. For Existing Windows 2000 Installation 1. Install the board and boot up Windows 2000. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommended) and click Next. 4. Insert the driver diskette, check Floppy disk drives, uncheck the other boxes, and click Next. Click Next again to continue. 5. Click Finish, remove the driver diskette and restart Windows to complete driver installation. Windows XP/Server 2003 Windows XP/Server 2003 1. Install the board and follow Microsoft procedures to install Windows XP accordingly. 2. Restart your system when prompted during Windows' installation. 3. At the Windows Setup screen, press F6 to install the driver. 4. Insert the driver diskette. Press S then press Enter. 5. Select Silicon Image SiI 0680 ATA/133 Controller and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete Windows XP installation. 7. When the Software Installation warning pops up, click Yes. And when the Hardware Installation warning pops up, click Yes again. For Existing Windows XP/Server 2003 Installation 1. Install the board and boot up Windows XP. 2. At the Found New Hardware Wizard, insert the driver diskette, select Install the software automatically (Recommended), then click Next. 3. Click Finish, remove the driver diskette and restart Windows to complete the installation. To Verify Windows 2000/XP/2003 Installation To Verify Windows 2000/XP/2003 Installation . Right click My Computer and click Manage....

Download now

Please, enter two numbers from picture: